Plug & Play Replacement Camera Kit For 2008-2014 F150, Includes housing and emblem
Replaces a broken factory camera!
Does your factory camera no longer function? Are you looking for an affordable alternative to a factory camera for collision repair? This is your kit! No reprogramming required!
This camera is a high quality aftermarket replacement to Ford® part number BL3Z-19G490-B, or 9L3Z-19G490-C. This camera kit includes a factory tailgate emblem housing and factory emblem. The camera is pre-mounted in the housing and will plug in just like a factory camera would. This camera uses a Super CMOS sensor so the picture quality is crisp, clear, and colorful just like your factory camera was! In fact, we even replicated the factory parking guidelines so you can continue to utilize that feature for added safety and convenience.
This kit comes with the following components:
- Camera Source Super CMOS camera module designed to fit the factory Ford® housing and plugs into existing factory Ford® tailgate harness at the camera
- Complete OEM Ford® housing assembly with camera pre-mounted
- Replacement OEM Ford® emblem
Camera Details:
- Super CMOS - 600 TV lines of resolution - the best available and only from Camera Source
- Factory parking guidelines in the display
- 170 degree view
- .1 minimum lux night vision
- 3 year warranty! Don't pay big bucks at your Ford® dealer to replace your camera when you can do it yourself for a fraction of the price!
| SKU | CS-FTRb-MOD-EH |
|---|---|
| Video System | NTSC |
| Waterproof/Dustproof Level | IP 67 |
| Night Vision | .1 Lux |
| Power Supply | 12 Volts |
| System Manufacturer | EVI Systems |
| Camera Resolution | 600 TVL |
| Parking Guidelines | Yes |
| Camera Orientation | Rear Facing |
| Connection | Factory Connector |
| Sensor Type | Super CMOS |
| Viewing Angle | 170 Degrees |
| Warranty | 3 Year |
| Camera Type | Rear Camera |
| Vehicle Category | Truck |
| Number of Cameras | 1 |
| Reason for Shopping | Factory camera failed/need replacement |
| Wiring Type | Factory Plug&Play |
| Camera Mount Location | Factory Tailgate |
| For a monitor it uses | Your factory display |
| Radio Screen Size | 4.2” Ford, 8” Ford Sync 2, 8" Ford Sync 3 |
| Make | Ford |
| Model | F-150 |
| Year | 2008,2009,2010,2011,2012,2013,2014 |
| Make Filter | Ford |
| Model Filter | F-150 |
| Year Filter | 2008, 2009, 2010, 2011, 2012, 2013, 2014 |
2008-2014 F series trucks with factory backup camera in the emblem. This kit will not work on trucks that did not come from the factory with a backup camera.
NOTE: The factory zoom feature will be disabled with this camera and guidance blocks that fill in are not available.
Simply remove the old Ford® emblem from your tailgate by gently prying the emblem from the base. Remove the two screws holding the base to the tailgate. Gently pull forward to remove the base from the tailgate and it will expose the bracket holding the factory camera in place. Disconnect the wire harness from the back of the camera. Remove the camera and housing. Install the new camera and housing in reverse order from the way it was removed. Plug the camera into the factory harness and screw the housing back on the tailgate. Once the camera has been tested replace the factory emblem... SIMPLE!
Q: My truck has parking sensors that beep and show green, yellow, and red boxes on the display as you get closer to objects. Will this feature still work?
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
Related Products
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount 10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount