2004 (with large tailgate center emblem), 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015*, 2016* Ford® F-150, F-250, F-350, F-450, F-550 with large blue oval in the center of the tailgate.

This is not a replacement for a burned out factory camera.  See SKU: CS-FTRb-MOD-EH for an aftermarket replacement for your factory camera. 

Also will fit Sport Trac and Flex models with the large blue oval in the center of the liftgate/tailgate.

This kit is designed to replace your existing blue oval.

*NOTE: 2015+ F-150 models use a slightly larger emblem on the tailgate.  If you have the new generation F150 you should purchase our handle camera kit instead CS-15FTRH-OEM.  The CS-FTRa will still fit the 2015 and 2016 Super Duty series.

This camera can be connected to any aftermarket monitor with an RCA input. An interface module kit is required if connecting to your factory installed navigation - we stock 'em so have a look at our online catalog to find the package price!

Your factory tailgate blue oval is held on with two sided tape, use a heat gun and the included fishing line to work the old emblem off the surface of the tailgate. On 2008 and older models you will need to drill an access hole for the camera to pass through the surface of the tailgate - drilling template included. You will also need to drill a hole in the back of your bed for the camera harness to pass through (2008 or older only). The instructions walk you through the entire installation process step-by-step.

The wire harness has a single point weather resistant connection that connects to the camera near the spare tire under the truck - allows for easy tailgate removal! The harness is 25' long so all connections can be made inside the cab if desired. However, there is also a quick pigtail at the rear of the included harness giving you the option to tap into reverse power at the rear of the truck - easy! Video connection connects to any monitor with an RCA video input.

This kit doesn't include instructions for mirror replacement but if you are considering a video mirror as your monitor there are some things to consider:

1. If you have a Sync microphone built into your factory rear view mirror you will need to purchase a separate external microphone since your factory mirror will be removed. A factory microphone relocation kit is available from Ford - Part #8T4Z-19A391-A
2. For trucks with a factory compass you will have to relocate the compass card from inside the factory mirror. If you bundle with the Gentex® mirror you will get everything you need to relocate this compass card.
3. For trucks with rain sensing wipers you will likely need to slightly modify the mounting base to get it fit on the replacement mirror.