10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Plug & Play Flush Mount Camera Kit, Fits GM® Truck
SKU#: CS-GMTRSK-FM4
Quantity
Uses factory camera connector under tailgate!
Camera is FMVSS 111 compliant! This is a plug and play camera kit that will allow you to replace your factory tailgate camera with this rear facing flush mount camera!
This universal camera mounts flush with a flat surface. Drill a 22.5mm hole(hole saw included) and run the cable through to your factory backup camera connection.
Kit includes the following:
Camera Specifications:
| System Manufacturer | EVI Systems |
| Camera Resolution | 600 TVL |
| Camera Type | Rear Camera, Utility Bed Camera Systems, Trailer/Camper/5th Wheel camera |
| For a monitor it uses | Your factory display |
| Fit Type | Universal fit |
| Connection | Factory Connector |
| Make | Chevrolet,GMC |
| Camera Mount Location | Camper/Utility Bed, Universal Mount |
| Night Vision | .1 Lux |
| Camera Orientation | Rear Facing |
| Parking Guidelines | Selectable on/off |
| Power Supply | 12 Volts |
| Radio Screen Size | 4.2\ MyLink, 8\ MyLInk/Intellilink |
| Sensor Type | Super CMOS |
| Vehicle Category | Truck, Camper/Trailer (if connecting to vehicle wiring) |
| Video System | NTSC |
| Viewing Angle | 170 Degrees |
| Model | Silverado,Silverado HD,Sierra,Sierra HD |
| Warranty | 3 Year |
| Waterproof/Dustproof Level | IP 67 |
| Wiring Type | Factory Plug&Play |
| Year | 2010,2011,2012,2013,2014,2015,2016,2017,2018 |
| Make Filter | Chevrolet, GMC |
| Model Filter | Sierra, Sierra HD, Silverado, Silverado HD |
| Year Filter | 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 |
2010-2013 GMC® Sierra and Chevrolet® Silverado and 2010-2014 HD series truck with a factory installed backup camera
2014-2015 GMC® Sierra and Chevrolet® Silverado truck with a factory installed backup camera.
2016-2018 GMC® Sierra and Chevrolet® Silverado truck with a factory installed backup camera.
Be sure to select the correct model year from the dropdown menu when ordering to ensure you receive the correct plug and play harness for your truck.
**EVI Systems has certified this camera system to comply with FMVSS 111 regulations as set forth by the National Highway Traffic Safety Administration (NHTSA). Testing has been performed jointly in-house and by a certified laboratory to meet or exceed the minimum requirements set forth by TP-111-V-01. FMVSS 111 field of view requirements and any other vehicle related certification is ultimately the responsibility of the vehicle up-fitter to ensure compliance.
Camera requires a 22.5 mm hole on a flat surface for flush mounting. It will require a flat section approximately 1" x 1" for mounting. Drill the hole and connect the camera harness to the OEM conversion harness. Run the cable to your factory backup camera connection under the truck and plug it in.
There is approximately 6' of wire between the camera and the factory connector.
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
Thank You Veterans and Civil Servants!