10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Backup Camera fits 2013-2014 Ford® F150/Super Duty 4.2" MyFord® Display
SKU#: CS-FTRa-MYT42F
Quantity
Plug & Play w/ 4.2" factory display!
This is a OEM grade backup camera solution to fit your Ford® F-Series truck 4.2" MyFord® screen - also provides multi-cam support! This will fit any 2013-14 F-150 with the large blue oval in the center of the tailgate and 4.2" screen in dash, and also up to 2016 Super Duty. If you have a 2015 F-150 you should purchase our new F150 handle camera system instead as Ford® no longer puts the camera in the emblem on the F-150.
Replace your existing blue oval with this factory Ford® emblem kit bundled with our newest and best Super-CMOS camera for a kit that will look like it was installed at the factory, but cost you a fraction of the price! This camera will see the rear bumper and hitch in the display! No programming necessary as the included module is plug and play and will perform the necessary programming for you. This system also allows for the addition of a front camera (front camera not included) that can be activated with a toggle switch (not included).
Kit includes:
Camera Specifications:
This kit allows you to see what is directly behind the truck - it will even see the rear bumper and hitch! Save $$$$$ over a factory kit and enjoy the upgraded clarity of our high resolution Super CMOS camera!
No monitor is included in this kit as it is intended to use your existing 4.2" screen. This camera comes with a 3 year limited warranty and is guaranteed to fit or your money back. Professional installation is recommended.
| System Manufacturer | EVI Systems |
| Number of Cameras | 1 |
| Camera Resolution | 600 TVL |
| Camera Type | Rear Camera |
| For a monitor it uses | Your factory display |
| Connection | Plug and Play to Factory Dash Display |
| Make | Ford |
| Camera Mount Location | Factory Tailgate |
| Night Vision | .1 Lux |
| Camera Orientation | Rear Facing |
| Parking Guidelines | Yes -Factory Duplicated |
| Power Supply | 12 Volts |
| Radio Screen Size | 4.2” Ford |
| Reason for Shopping | Adding camera(s) |
| Sensor Type | Super CMOS |
| Vehicle Interface | Includes Factory Integration Module |
| Vehicle Category | Truck |
| Camera Input Ports | 2 |
| Video System | NTSC |
| Viewing Angle | 170 Degrees |
| Model | F-150,Super Duty |
| Warranty | 3 Year |
| Waterproof/Dustproof Level | IP 67 |
| Wiring Type | Hard Wired |
| Year | 2013,2014 |
| Make Filter | Ford |
| Model Filter | F-150, Super Duty |
| Year Filter | 2013, 2014 |
2013, 2014 Ford® F-150, 2013-2016 F-250, F-350, F-450, F-550 with large blue oval in the center of the tailgate and 4.2" MyFord® screen.
This kit is designed to replace your existing blue oval and connect directly to your existing 4.2" screen.
You will need to remove your factory 4.2" screen to gain access to the back of the connections. The module will be plug and play and stubs out an RCA for the camera to connect directly to the screen. Once the screen is powered on it will run through the programming process to reprogram your screen for the backup camera - no dealer service required!
Your factory tailgate blue oval is held on with two sided tape, use the included fishing line to work the old emblem off the surface of the tailgate. The instructions walk you through the entire installation process step-by-step.
The wire harness has a single point weather resistant connection that connects to the camera near the spare tire under the truck - allows for easy tailgate removal! The harness is 25' long so all connections can be made inside the cab at the interface module. Video connection and power connection connects to the MyFord interface module that is included in this kit.
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
Thank You Veterans and Civil Servants!