10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Plug and Play Flush Mount Camera Kit , Fits 2010-2019 Tacoma
SKU#: CS-TAC-FM4
Availability:
In Stock
SKU#:
CS-TAC-FM4
$199.00
Quantity
Uses your factory camera connector!
Description
Camera is FMVSS 111 compliant! New Product in stock and ready to ship! This is a plug and play camera kit that will allow you to replace your factory tailgate camera with this rear facing flush mount camera!
This universal camera mounts flush with a flat surface. Drill a 22.5mm hole(hole saw included) and run the cable through to your factory backup camera connection.
Use this camera for bed campers, utility beds or any other application where you are required to remove your factory tailgate. Simply mount the camera in any flat surface and run the included 6' cable to your factory backup camera connection behind the rear bumper for a simple and seamless installation.
Kit includes the following:
- Black rear facing flush mount camera with our latest super CMOS camera - the latest camera technology!
- OEM conversion harness-approx 6 feet of wiring total
- 22.5 mm hole saw
- Installation instructions
- 3 year limited camera warranty
Camera Specifications:
- Super CMOS chip - outstanding color, contrast, and clarity!
- Removable parking guidelines
- 170 degree view
- 600 TV lines of resolution
- .1 lux minimum illumination - Outstanding night vision!
Specifications
| System Manufacturer | EVI Systems |
| Number of Cameras | 1 |
| Camera Resolution | 600 TVL |
| Camera Type | Rear Camera, Utility Bed Camera Systems |
| For a monitor it uses | Your factory display |
| Fit Type | Universal fit |
| Connection | Factory Connector |
| Make | Toyota |
| Camera Mount Location | Camper/Utility Bed, Universal Mount |
| Night Vision | < .2 Lux |
| Camera Orientation | Rear Facing |
| Parking Guidelines | Selectable on/off |
| Power Supply | 6 Volts |
| Reason for Shopping | Relocating factory camera |
| Sensor Brand | EVI Systems |
| Sensor Type | Super CMOS |
| Vehicle Category | Truck |
| Video System | NTSC |
| Viewing Angle | 170 Degrees |
| Model | Tacoma |
| Warranty | 3 Year |
| Waterproof/Dustproof Level | IP 67 |
| Wiring Type | Factory Plug&Play |
| Year | 2010,2011,2012,2013,2014,2015,2016,2017,2018,2019 |
| Make Filter | Toyota |
| Model Filter | Tacoma |
| Year Filter | 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 |
Compatibility
2010-2019 Tacoma with factory installed backup camera.
NOTE: vehicle must have come from the factory with a rear camera in order for this kit to function. Exception is some 2014+ vehicles are prewired directly to the radio so this kit will plug right in and function even if your truck didn't come with a camera.
Installation
Camera requires a 22.5 mm hole on a flat surface for flush mounting. It will require a flat section approximately 1" x 1" for mounting. Drill the hole and connect the camera harness to the OEM conversion harness. Run the cable to your factory backup camera connection under the truck and plug it in.
There is approximately 6' of wire between the camera and the factory connector.
Customer Reviews
Question & Answers
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
Related Products
