Plug & Play Flush Mount Camera Kit, Fits 2007-2009 Tundra
Availabilty: In stock
SKU
CS-7TUN-FM4
$199.00
Uses factory connector!
Camera is FMVSS 111 compliant! This is a plug and play camera kit that will allow you to replace your factory tailgate camera with this rear facing flush mount camera!
This universal camera mounts flush with a flat surface. Drill a 22.5mm hole(hole saw included) and run the cable through to your factory backup camera connection.
Kit includes the following:
- Black rear facing surface mount camera with our latest super CMOS camera - the latest camera technology!
- OEM conversion harness-approx 6 feet of wiring total
- 22.5 mm hole saw
- Installation instructions
- 3 year limited camera warranty
Camera Specifications:
- Super CMOS chip - outstanding color, contrast, and clarity!
- Removable parking guidelines
- 170 degree view
- 600 TV lines of resolution
- .1 lux minimum illumination - Outstanding night vision!
SKU | CS-7TUN-FM4 |
---|---|
Video System | NTSC |
Waterproof/Dustproof Level | IP 67 |
Night Vision | < .2 Lux |
Power Supply | 6 Volts |
System Manufacturer | EVI Systems |
Camera Resolution | 600 TVL |
Parking Guidelines | Selectable on/off |
Camera Orientation | Rear Facing |
Fit Type | Universal fit |
Connection | Factory Connector |
Sensor Type | Super CMOS |
Viewing Angle | 170 Degrees |
Warranty | 3 Year |
Camera Type | Rear Camera, Utility Bed Camera Systems |
Vehicle Category | Truck |
Number of Cameras | 1 |
Reason for Shopping | Relocating factory camera |
Wiring Type | Factory Plug&Play |
Camera Mount Location | Camper/Utility Bed, Universal Mount |
For a monitor it uses | Your factory display |
Make | Toyota |
Model | Tundra |
Year | 2007,2008,2009 |
Make Filter | Toyota |
Model Filter | Tundra |
Year Filter | 2007, 2008, 2009 |
2007-2009 Tundra with factory camera wiring.
Camera requires a 22.5 mm hole on a flat 1" X 1" surface for flush mounting. Drill the hole and connect the camera harness to the OEM conversion harness. Run the cable to your factory backup camera connection under the truck and plug it in.
There is approximately 6' of wire between the camera and the factory connector.
Write Your Own Review
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount Do You Need Any Help? Give Us a Call. 888-844-9763