10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Plug and Play Flush Mount Camera, Fits 2021-2023 GM® Heavy Duty Work Truck
SKU#: CS-21GMWTHD430-FM
Quantity
Easily add to a GM® Heavy Duty Work Truck!
Camera Specifications:
**This is for a Work Truck only- Window sticker and/or VIN will show (WT).
| System Manufacturer | EVI Systems |
| Number of Cameras | 1 |
| Camera Resolution | 600 TVL |
| Camera Type | Rear Camera, Utility Bed Camera Systems |
| For a monitor it uses | Your factory display |
| Fit Type | Universal fit |
| Connection | Factory Connector |
| Make | GMC,Chevrolet |
| Camera Mount Location | Camper/Utility Bed, Universal Mount |
| Night Vision | < .2 Lux |
| Camera Orientation | Rear Facing |
| Parking Guidelines | Selectable on/off |
| Power Supply | 12 Volts |
| Radio Screen Size | Factory LCD |
| Reason for Shopping | Relocating factory camera |
| Sensor Type | Super CMOS |
| Vehicle Category | Truck, Fleet Vehicle (i.e. cargo van) |
| Video System | NTSC |
| Viewing Angle | 150 Degrees |
| Model | Sierra HD,Silverado HD |
| Warranty | 3 Year |
| Waterproof/Dustproof Level | IP 67 |
| Wiring Type | Factory Plug&Play |
| Year | 2021,2022,2023 |
| Make Filter | Chevrolet, GMC |
| Model Filter | Sierra HD, Silverado HD |
| Year Filter | 2021, 2022, 2023 |
2021-2023 GMC® Sierra and Chevrolet® Silverado 2500,3500,4500,5500 series "Work Truck" with factory installed backup camera wiring and "IOR" RPO code. Contact your GM® dealer with your VIN number to determine that your VIN has the "WT" specification and the "IOR" RPO code.
Also confirm that you have the 30 pin connector for the camera wiring at the back of the truck.
**This is for a Work Truck only- Window sticker and/or VIN will indicate (WT).
**EVI Systems has certified this camera system to comply with FMVSS 111 regulations as set forth by the National Highway Traffic Safety Administration (NHTSA). Testing has been performed jointly in-house and by a certified laboratory to meet or exceed the minimum requirements set forth by TP-111-V-01. FMVSS 111 field of view requirements and any other vehicle related certification is ultimately the responsibility of the vehicle up-fitter to ensure compliance.
Camera requires a 22.5 mm hole on a flat surface for flush mounting. It will require a flat section approximately 1" x 1" for mounting. Drill the hole and connect the camera harness to the OEM conversion harness. Run the cable to your factory backup camera 30 pin connection under the truck and plug it in.
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
Thank You Veterans and Civil Servants!