10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Universal Front Camera Fits Select Ford® Vehicles with SYNC 3
SKU#: 7CS-ULPM-RU
Availability:
In Stock
SKU#:
7CS-ULPM-RU
$492.00
Quantity
Add a front camera!
Description
Adding a front camera to select Ford® 8" Factory Display Radios could never be simpler and more affordable! - see application section for details.
This CMOS license plate mounted camera kit will allow you to integrate front view safety to your factory 8" display. The camera can be converted to mount on any flat surface or simply mount to your license plate! Both brackets are included. All the cables are included and the 25' long harness terminates with an RCA connection so you can integrate into the included factory display Interface. The camera has adjustable tilt and comes with parking guideline options, meaning that the guidelines can be turned off.
Force Factory View Front camera at any time: Perfect for parking!
Navigation unlock: This interface module allows passenger access to the Navigation menu while vehicle is in motion. Enter a destination address on the go!
Camera specifications:
- Mini license bar universal mount camera
- Super CMOS sensor for ultra clear display (the best available)
- Resolution: 600 TV lines
- Minimum Illumination: 0.2 Lux
- View Angle: 170
- Video Output: Full color video
- Working Voltage: DC 9-16V
- Parking Line: On/Off selectable
- Image: Forward facing
- Water proof: IP67
- 25 foot harness
- 3 year warranty on the camera
Interface module features:
- Front Camera composite video input.
- Our video interface will also enable : Passenger access to Navigation menu while vehicle is in motion.-Press rear defroster button 4X.
- **NOTE** when certain functions are activated (viewing cameras in motion or nav bypass) navigation won't track / guide properly, disengage function to use the navigation.
- Force Front Camera at anytime-Press and hold the radio power button for 7 seconds.
- Video Interface is 100% Plug & Play
No monitor is included with this kit as it is designed to work with your existing factory radio screen. This camera comes with a 3 year warranty. Professional installation is recommended.
Specifications
| System Manufacturer | EVI Systems |
| Number of Cameras | 1 |
| Camera Resolution | 600 TVL |
| Camera Type | Front Camera |
| For a monitor it uses | Your factory display |
| Connection | Plug and Play to Factory Dash Display |
| Make | Ford |
| Camera Mount Location | Front Grille, Universal Mount |
| Night Vision | < .2 Lux |
| Camera Orientation | Front Facing |
| Parking Guidelines | Selectable on/off |
| Power Supply | 12 Volts |
| Radio Screen Size | 8\ Ford Sync 3 |
| Reason for Shopping | Adding camera(s) |
| Sensor Brand | EVI Systems |
| Sensor Type | Super CMOS |
| Vehicle Interface | Includes Factory Integration Module |
| Vehicle Category | Truck |
| Camera Input Ports | 1 |
| Video System | NTSC |
| Viewing Angle | 170 Degrees |
| Model | F-150,Edge,Super Duty,Explorer,Expedition |
| Warranty | 3 Year |
| Waterproof/Dustproof Level | IP 67 |
| Wiring Type | Hard Wired |
| Year | 2016,2017,2018,2019,2020,2021 |
| Make Filter | Ford |
| Model Filter | Edge, Expedition, Explorer, F-150, Super Duty |
| Year Filter | 2016, 2017, 2018, 2019, 2020, 2021 |
Compatibility
Vehicle must have a factory installed back up camera and an 8" factory SYNC 3 radio display
- 2016-2021 F-150
- 2017-2021 F250,F350, F450, F550
- 2017-2024 Explorer
- 2016-2021 Expedition
This camera kit will fit any vehicle with a license plate when using the license plate bracket. When using the small mount bracket the minimum surface required is 1.5 inches wide by .75 inches deep.
Installation
Camera installs on either your license plate mount or on any flat surface - comes with two brackets.
The camera interface is plug and play with your factory radio wiring and does not require any dealer programming. It does require you to remove the radio in order to install. Detailed instructions included.
Plug the camera RCA into the RCA input on the interface module. Connect camera red wire to the 12V output wire on the interface harness and connect black camera wire to a solid ground on the truck frame.
Customer Reviews
Question & Answers
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
Related Products
