3rd Brake Light Camera for Trucks w Factory Camera, Fits 2019-2022 RAM®
Add a cargo camera to your factory display!
This is an add-on trim bezel that mounts to your factory third brake light and adds the rear camera convenience to the top of your cab! Now you can see your fifth wheel or anything else that is inside your bed without having to have a spotter guiding you for trailer connections etc. Adds a trim bezel with premounted camera to your factory third light assembly and the camera connects to the same connector that your factory rear camera uses.
Comes with parking guideline options, meaning that the guidelines can be turned off. The included screen interface provides multi-cam support so you can add up to 4 cameras to your factory UAV 8.4" or UAX 12.1" display screen!
The integration module allows for plug and play integration into your factory screen without having to flash a program your radio. The factory rear camera will come on automatically when in reverse and 3rd brakelight camera can be manually activated using the included activation button.
Kit includes:
- Adjustable camera pre-mounted in RAM 3rd brake light bezel with harness
- Interface module for your factory radio (radio not included). Provides multi-camera support for up to 4 cameras in addition to your factory tailgate camera. Camera wiring harness
- Zip ties
- Detailed installation instructions
- 3 year limited warranty
Camera Specifications:
- Super CMOS sensor for ultra clear display
- Resolution: 600 TV lines
- Minimum Illumination: 0.2 Lux
- View Angle: 170
- Video Output: Full color video
- Working Voltage: DC 9-16V
- Parking Line: On/Off selectable
- Image: Mirror/Non mirror selectable
- Adjustable tilt to obtain the best view!
- Waterproof: IP67
- 25 foot harness
RAM Multi Cam interface for UAV 8.4" or UAX 12.1 Display:
- Uses existing UAV 8.4" or UAX 12.1 factory display (screen not included)
- Allows addition of this cargo camera that can be manually triggered using the included activation button
- Pass through for existing factory backup camera
- RCA inputs for 4 additional cameras-not including OEM camera
This kit allows you to see what is in the bed of the truck! This camera comes with a 3 year warranty and professional installation is recommended.
| SKU | CS-19DTR3L-VI |
|---|---|
| Cam Only/Complete Kit | Complete Kit |
| Video System | NTSC |
| Vehicle Interface | Includes Factory Integration Module |
| Waterproof/Dustproof Level | IP 67 |
| Night Vision | .1 Lux |
| Power Supply | 12 Volts |
| System Manufacturer | EVI Systems |
| Camera Resolution | 600 TVL |
| Parking Guidelines | Yes |
| Connection | Plug and Play to Factory Dash Display |
| Sensor Type | Super CMOS |
| Viewing Angle | 170 Degrees |
| Camera Input Ports | 4 |
| Warranty | 3 Year |
| Camera Type | Cargo/3rd Brake Light camera |
| Vehicle Category | Truck |
| Number of Cameras | 1 |
| Reason for Shopping | Adding the camera(s) |
| Wiring Type | Hard Wired |
| Camera Mount Location | Factory 3rd Brake Light |
| For a monitor it uses | Your factory display |
| Radio Screen Size | 8.4" Mopar, Factory LCD |
| Make | RAM |
| Model | 1500,HD |
| Year | 2019,2020,2021,2022 |
| Make Filter | Ram |
| Model Filter | 1500, HD |
| Year Filter | 2019, 2020, 2021, 2022 |
Compatible with 2019-2022 RAM® trucks with factory UAV 8.4" or UAX 12.1" U-Connect 4 radio system.
To confirm your radio code, contact your dealer with your VIN. This interface module is only compatible with the 2 radio codes listed above.
* Not compatible with UAM non-NAV or U-Connect 5 radio system.
NOTE: Factory 3rd brake light should measure approximately 16 inches for this to fit. If your 3rd brake light is smaller than this, please contact us.
Remove your factory 3rd brake light and install the trim bezel from this kit, then reinstall your factory light.
Connect camera cable to the main harness. Run the harness to the inside of the vehicle to the interface module.
You will need to remove your factory screen to gain access to the back of the connections. The module will be plug and play and stubs out to a female RCA connection for the camera to connect directly to the screen. Detailed instructions included.
NOTE: The supplied interface harness has a wire labeled “ACC out” and will provide 12v accessory power for your cargo camera. However, if you’re adding multiple cameras, it should NOT be used to power the cameras and we recommend using our CS-RPW-P power module to ensure adequate power for all cameras.
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount 10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount