2020-2021 Super Duty OE Style Front Emblem Camera for Aftermarket RCA Display
OE Style front emblem camera!
Add an OE style front emblem camera to your vehicle's aftermarket RCA display or separate monitor!
The front camera in this kit comes pre-mounted in an OEM Ford bracket so it will look like the front camera that comes with the Ford 360 system. Swap out your existing factory emblem for this emblem and housing with a pre-mounted camera.
***Your factory grille must have the camera cutout for this kit to fit properly. If your grille does not have this cutout, your factory grille will have to be swapped with a different grille that is designed to mount the camera assembly and this grille is NOT included in the kit.
*** See images for an example of a grille with camera cutout. If needed, many times you can find a brand new grille with the required cutout on ebay or from a Ford dealership
Camera specifications:
- OEM style grille mounted camera with our latest super CMOS camera - the latest camera technology!
- Resolution: 600 TV lines
- Minimum Illumination: 0.2 Lux
- View Angle: 170
- Video Output: Full color video
- Working Voltage: DC 9-16V
- Parking Line: On/Off selectable
- Image: Forward facing
- Water proof: IP67
- 25 foot harness
- 3 year warranty on the camera
No monitor is included with this kit. This camera comes with a 3 year warranty. Professional installation is recommended.
| SKU | CS-20FTRSDFOE |
|---|---|
| Cam Only/Complete Kit | Complete Kit |
| Video System | NTSC |
| Vehicle Interface | Not Included |
| Waterproof/Dustproof Level | IP 67 |
| Night Vision | < .2 Lux |
| Power Supply | 12 Volts |
| System Manufacturer | EVI Systems |
| Camera Resolution | 600 TVL |
| Parking Guidelines | Selectable on/off |
| Camera Orientation | Front Facing |
| Connection | Aftermarket Display (RCA) |
| Sensor Type | Super CMOS |
| Sensor Brand | EVI Systems |
| Viewing Angle | 170 Degrees |
| Warranty | 3 Year |
| Grade Level | OE Grade |
| Camera Type | Front Camera |
| Vehicle Category | Truck |
| Number of Cameras | 1 |
| Reason for Shopping | Adding the camera(s) |
| Wiring Type | Hard Wired |
| Camera Mount Location | Front Grille |
| For a monitor it uses | Your factory display |
| Make | Ford |
| Model | Super Duty |
| Year | 2020,2021 |
| Make Filter | Ford |
| Model Filter | Super Duty |
| Year Filter | 2020, 2021 |
2020-2021 F250, F350, F450 with aftermarket RCA display and camera cutout in the grille.
***Your factory grille must have the camera cutout for this kit to fit properly. If your grille does not have this cutout, your factory grille will have to be swapped with a different grille that is designed to mount the camera assembly and this grille is NOT included in the kit.
*** See images for an example of a grille with camera cutout. If needed, many times you can find a brand new grille with the required cutout on ebay or from a Ford dealership.
NOTE: This camera is pre-mounted into an OEM front Ford emblem. This kit uses an OEM bracket and cannot be retrofitted to any other application.
Additional parts required if connecting to factory display.
The front camera mounts into your factory grille by replacing your existing emblem assembly with this camera assembly.
Run the harness to the cab and connect to your display. Locate a 12 volt accessory power source and ground. Plug the camera RCA into the RCA input on your monitor.
Professional installation is recommended.
**Camera wash system not included. Cover for the opening of where the camera wash system installs is included.
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
Related Products
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount 10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount