10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Plug & Play Flush Mount Camera Kit, Fits 2019+ RAM® 1500 Classic Body Style
SKU#: CS-19DTRSK-FM4
Availability:
In Stock
SKU#:
CS-19DTRSK-FM4
$199.00
Quantity
Uses factory camera connector under tailgate!
Description
FMVSS 111 compliant! This is a plug and play camera kit that will allow you to replace your factory tailgate camera with this rear facing flush mount camera!
Compatible with 2019+ RAM® 1500 Classic Body Style only. See our other options for other RAM® models.
Use this camera for salt spreaders, bed campers, 5th wheel applications, airstream tailgates, and any other application where you are required to remove your factory tailgate. This universal camera mounts flush with a flat surface. Drill a 22.5mm hole(hole saw included) and run the cable through to your factory backup camera connection.
Kit includes the following:
- Black rear facing flush mount camera with our latest super CMOS camera - the latest camera technology!
- OEM conversion harness
- 4 pin commercial grade-6',9',16',32',64' cable lengths available- select from drop down above
- 22.5 mm hole saw
- Installation instructions
- 3 year limited camera warranty
Camera Specifications:
- Super CMOS chip - outstanding color, contrast, and clarity!
- Removable parking guidelines
- 170 degree view
- 600 TV lines of resolution
- .1 lux minimum illumination - Outstanding night vision!
Specifications
| System Manufacturer | EVI Systems |
| Number of Cameras | 1 |
| Camera Resolution | 600 TVL |
| Camera Type | Rear Camera, Utility Bed Camera Systems |
| For a monitor it uses | Your factory display |
| Fit Type | Universal fit |
| Connection | Factory Connector |
| Make | RAM |
| Camera Mount Location | Camper/Utility Bed, Universal Mount |
| Night Vision | .1 Lux |
| Camera Orientation | Rear Facing |
| Parking Guidelines | Selectable on/off |
| Power Supply | 12 Volts |
| Radio Screen Size | 4.3\ Mopar, 5\ Mopar, 8.4\ Mopar |
| Reason for Shopping | Relocating factory camera |
| Sensor Type | Super CMOS |
| Vehicle Category | Truck, Camper/Trailer (if connecting to vehicle wiring) |
| Video System | NTSC |
| Viewing Angle | 170 Degrees |
| Model | 1500 |
| Warranty | 3 Year |
| Waterproof/Dustproof Level | IP 67 |
| Wiring Type | Factory Plug&Play |
| Year | 2019,2020,2021,2022 |
| Make Filter | Ram |
| Model Filter | 1500 |
| Year Filter | 2019, 2020, 2021, 2022 |
Compatibility
2019+ RAM® 1500 Classic Body Style truck with a factory installed backup camera. This kit relies on the factory camera chassis harness to operate.
**EVI Systems has certified this camera system to comply with FMVSS 111 regulations as set forth by the National Highway Traffic Safety Administration (NHTSA). Testing has been performed jointly in-house and by a certified laboratory to meet or exceed the minimum requirements set forth by TP-111-V-01. FMVSS 111 field of view requirements and any other vehicle related certification is ultimately the responsibility of the vehicle up-fitter to ensure compliance.
Installation
Camera requires a 22.5 mm hole on a flat surface for flush mounting. It will require a flat section approximately 1" x 1" for mounting. Drill the hole and connect the camera harness to the OEM conversion harness. Run the cable to your factory backup camera connection under the truck and plug it in.
Customer Reviews
Question & Answers
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
Related Products
