10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Mini Universal Camera Fits 2017-2026 Super Duty Cab and Chassis
SKU#: CS-17SDLP-CC
Availability:
In Stock
SKU#:
CS-17SDLP-CC
$199.00
Quantity
Easily add to a Super Duty cab and chassis!
Description
FMVSS 111 compliant! This kit is for Cab and Chassis vehicles only and these are rare so chances are you need the non-Cab and Chassis version. See the compatibility tab for details before purchasing this kit. This is a plug and play camera kit that will allow you to add a camera to a cab and chassis truck that has been pre-wired at the factory and has a 4.2" or 8" factory display that is already programmed for a camera. Your truck must be prewired and programmed for a camera or this kit will not work. Please see the compatibility tab for more information!
Use this camera for cab and chassis trucks that did not come with a bed from the factory. Simply mount the camera on any flat surface and run the cable to your factory backup camera connection for a simple and seamless installation. Choose the cable length from the drop down above. The kit comes with a license plate bracket and a mini-universal bracket, which allows flexibility in mounting locations.
*Factory radio must be programmed for a back up camera from the factory or by a dealership. If it hasn't been programmed see SKU: CS-17SDLP-CCP. CS-17SDLP-CCP includes a programmer.
Kit includes the following:
- License plate/universal camera with Super CMOS sensor
- OEM wiring conversion harness - allows the system to be plug and play with your factory camera connector
- 5', 10',15', 25' cable length available-select from drop down above.
- 3 year camera warranty!
Camera Specifications:
- Camera Source Super CMOS for a super clear image
- Night vision
- 170 degree view
- 600 TV lines of resolution
- Parking guidelines (selectable at the harness)
- Camera can face forward or backward (selectable at the harness)
**Not compatible with Super Duty trucks that have the 360 degree view system** See CS-FTRSKLP-17SD-TRL.
Specifications
| System Manufacturer | EVI Systems |
| Number of Cameras | 1 |
| Camera Resolution | 600 TVL |
| Camera Type | Rear Camera, Utility Bed Camera Systems |
| For a monitor it uses | Your factory display |
| Fit Type | Universal fit |
| Connection | Factory Connector |
| Make | Ford |
| Camera Mount Location | Camper/Utility Bed, Universal Mount |
| Night Vision | < .2 Lux |
| Camera Orientation | Front or Rear Facing |
| Parking Guidelines | Selectable on/off |
| Power Supply | 12 Volts |
| Radio Screen Size | 4.2” Ford, 8\ Ford Sync 3, 8\ Ford Sync 4, 12\ Ford Sync 4 |
| Reason for Shopping | Relocating factory camera |
| Sensor Type | Super CMOS |
| Vehicle Category | Truck, Fleet Vehicle (i.e. cargo van) |
| Video System | NTSC |
| Viewing Angle | 170 Degrees |
| Model | Cab & Chassis |
| Warranty | 3 Year |
| Waterproof/Dustproof Level | IP 68 Camera |
| Wiring Type | Factory Plug&Play |
| Year | 2017,2018,2019,2020,2021,2022,2023,2024,2025,2026 |
| Make Filter | Ford |
| Model Filter | Cab & Chassis |
| Year Filter | 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026 |
Compatibility
2017-2026 Ford® Super Duty F350, F450, F550 cab and chassis trucks that have been pre-wired for a camera from the factory and have a 4.2" or 8" display from the factory.
This kit relies on the factory camera chassis harness to operate.
Not compatible if your truck has the 360 view system.
See our other Super Duty truck options if your truck came from the factory with a bed and you are removing the bed to add service body, utility bed, dump truck, flat bed, and any other application where you do not have a tailgate. This kit will only work on the trucks that came from the factory without a bed. Please verify the connector shown in the photos against the connector on your truck before ordering. If you are still not sure please call us for assistance.
**EVI Systems has certified this camera system to comply with FMVSS 111 regulations as set forth by the National Highway Traffic Safety Administration (NHTSA). Testing has been performed jointly in-house and by a certified laboratory to meet or exceed the minimum requirements set forth by TP-111-V-01. FMVSS 111 field of view requirements and any other vehicle related certification is ultimately the responsibility of the vehicle up-fitter to ensure compliance.
Installation
Mount the camera anywhere! Versatile mount allows for surface mount in virtually any location. Camera tilt is adjustable so the view can be adjusted to accommodate any view required! Plug OEM adapter harness into the factory camera harness under the truck.
Customer Reviews
Question & Answers
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
Related Products
