10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Plug & Play Replacement Emblem Camera For 2009-16 Super Duty-Emblem and Housing included
SKU#: CS-FTRSDB-MOD-EH
Quantity
Replaces a broken factory camera!
Does your factory camera no longer function? Are you looking for an affordable alternative to a factory camera for collision repair? This is your kit!
This camera is a high quality aftermarket replacement to Ford® part number FC3Z-19G490-B, or FC3Z-19G490-C. This camera module will fit in your factory tailgate emblem housing and plug into the factory harness, just like a factory camera would. This camera uses a Super CMOS sensor so the picture quality is crisp, clear, and colorful just like your factory camera was! In fact, we even replicated the factory parking guidelines so you can continue to utilize that feature for added safety and convenience.
This kit comes with the following components:
Camera Details:
NOTE: The factory zoom feature will be disabled with this camera and guidance blocks that fill in are not available.
| System Manufacturer | EVI Systems |
| Number of Cameras | 1 |
| Camera Resolution | 600 TVL |
| Camera Type | Rear Camera |
| For a monitor it uses | Your factory display |
| Connection | Factory Connector |
| Make | Ford |
| Camera Mount Location | Factory Tailgate |
| Night Vision | .1 Lux |
| Camera Orientation | Rear Facing |
| Parking Guidelines | Yes |
| Power Supply | 12 Volts |
| Reason for Shopping | Factory camera failed/need replacement |
| Sensor Type | Super CMOS |
| Vehicle Category | Truck |
| Video System | NTSC |
| Viewing Angle | 170 Degrees |
| Model | Super Duty |
| Warranty | 3 Year |
| Waterproof/Dustproof Level | IP 67 |
| Wiring Type | Factory Plug&Play |
| Year | 2009,2010,2011,2012,2013,2014,2015,2016 |
| Make Filter | Ford |
| Model Filter | Super Duty |
| Year Filter | 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 |
2009-2016 Super Duty trucks with factory backup camera in the emblem. This kit will not work on trucks that did not come from the factory with a backup camera.
NOTE: The factory zoom feature will be disabled with this camera and guidance blocks that fill in are not available.
Simply remove the old Ford® emblem from your tailgate by gently prying the emblem from the base. Remove the two screws holding the base to the tailgate. Gently pull forward to expose the back of the camera and wiring. Unplug the old camera and remove housing. Plug the new camera into the factory harness and screw the housing onto the tailgate. Once the camera has been tested replace the factory emblem... SIMPLE!
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
Thank You Veterans and Civil Servants!