10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Trailer Camera Kit, 360 OEM Cams In Motion, Nav Unlock, Fits 2016-2019 Ford® Raptor
SKU#: CS-RAP360TC-CK
Availability:
Out of Stock
SKU#:
CS-RAP360TC-CK
$744.00
Quantity
View your OEM 360 view cams in motion-Add a trailer camera!
Description
Add a trailer camera to your 2016-2019 Ford® Raptor truck that has the 360 view camera system. This kit includes a harness that will allow you to use your 8" factory SYNC 3 radio display to view your OEM 360 Cameras In Motion, unlock your Navigation to enter addresses while the vehicle is in motion, and includes a Video interface to allow the addition of a trailer camera.
This kit comes in handy when you have a trailer behind the truck since the rear of the trailer is a serious blind spot! Designed to solve that problem by adding the second rear camera on the rear of the truck or trailer. This camera has built in LED's for better night vision. Comes with everything you need to install the camera on the rear of the trailer and run a 4 pin coax to the cab to connect to the interface module. This kit even comes with our trailer quick disconnect system allowing you to disconnect your trailer with ease by making the camera connections as simple as unplugging the lights of the trailer.
Kit includes:
- Commercial grade night vision camera with 700 TV lines of resolution Sony CCD sensor (CS-UCCD-SONY)
- 64' length 4 pin coaxial weather proof cable (CS-UC20)
- Trailer quick disconnect system for easy camera connections - weather tight! (CS-UTQC)
- Mounting brackets for quick disconnect
- 4 pin male to RCA conversion harness so that you can connect to the interface module
- All connections are weather tight except those made inside the cab!
- Interface module that is plug and play with your factory 8" SYNC 3 Display
- Install instructions
- 1 Year warranty
Camera Specifications:
- 1/3" Sony CCD Commercial grade camera
- 700 TV lines of resolution
- 150 degree field of view
- 18 IR LED's for clear night vision even in complete blackness
- Weather grommet for easy cable passage to the interior
- Aluminum alloy weather tight casing with IP68 water resistance
- Weather tight screw connectors for extremely secure and dry connections
- 1 Year Warranty
Interface module details:
- Plug and Play with your 8" SYNC 3 factory display
- OEM 360 Camera in Motion- Unlock your 360 view cameras to view at anytime going down the road.
- NAV in motion lockout bypass- Passenger can enter addresses into the Navigation system while the vehicle is in motion. **NOTE** when certain functions are activated (viewing cameras in motion or nav bypass) navigation won't to track / guide properly, disengage function to use the navigation.
- Video input for trailer camera- Add a trailer camera and view it anytime going down the road
- 1 Year Warranty
**Only compatible with trucks that have the 360 degree view system from the factory.**
Specifications
| System Manufacturer | EVI Systems |
| Number of Cameras | 1 |
| Camera Resolution | 700 TVL |
| Camera Type | Rear Camera, Trailer/Camper/5th Wheel camera |
| For a monitor it uses | Your factory display |
| Fit Type | Universal fit |
| Connection | Plug and Play to Factory Dash Display |
| Make | Ford |
| Camera Mount Location | Universal Mount |
| Night Vision | 0 Lux |
| Camera Orientation | Rear Facing |
| Parking Guidelines | Not Available |
| Power Supply | 12 Volts |
| Radio Screen Size | 8\ Ford Sync 3 |
| Reason for Shopping | Adding camera(s) |
| Sensor Brand | EVI Systems |
| Sensor Type | CCD |
| Vehicle Category | Truck, Camper/Trailer (if connecting to vehicle wiring) |
| Camera Input Ports | 1 |
| Viewing Angle | 150 Degrees |
| Model | F-150 |
| Warranty | 1 Year |
| Waterproof/Dustproof Level | IP68 |
| Wiring Type | Hard Wired |
| Year | 2016,2017,2018,2019 |
| Make Filter | Ford |
| Model Filter | F-150 |
| Year Filter | 2016, 2017, 2018, 2019 |
Compatibility
2016-2019 Ford® Raptor trucks with 360 view camera system from the factory and 8" factory SYNC 3 display.
**Only compatible with trucks that have the 360 degree view system**
Installation
Remove the radio to gain access to the display screen, install the interface module. Module is plug and play with your factory radio-No cutting or splicing of factory wiring.
Camera installs virtually anywhere on the trailer. Then route the camera cable along the bottom of the trailer securing with zip ties along the way. Connect to the quick disconnect system at the tongue of the trailer. Install truck portion of the disconnect system to the truck and route the cable to the cab of the vehicle to the back of your factory display. Plug the RCA connector from the camera harness into the T-harness. To power the camera, locate an accessory 12v power source and clean piece of metal for grounding. Power connections for camera must be made inside the cab.
Make installation even easier with an add on 12 Volt power source to eliminate the need to locate a power source on the vehicle and avoid cutting or splicing into factory wiring! See related item SKU: CS-RPW-P
Customer Reviews
Question & Answers
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
Related Products
