10" High-Definition Quad Screen,1 AHD rear camera, 2 AHD side cameras
See both sides and behind!
Complete camera kit includes a 10" AHD Quad monitor, one 960P AHD rear camera, and two 960P AHD side cameras for maximum visibility and easy 3 camera quick disconnect trailer cable!
This complete kit contains everything you need to wire a vehicle for three total cameras and connect to the included 10" High Definition quad monitor.
This kit includes the following:
- (1) 10" AHD Quad monitor
- (1) AHD commercial grade rear view camera with Sony sensor and night vision - 960 TV lines of resolution, 0 LUX, 150 degree view
- (2) AHD commercial grade side view cameras with Sony sensors and night vision, 960 TV lines of resolution, 0 LUX, 120 degree view
- 32' 4 pin coaxial camera cables (2)
- 64' 4 pin coaxial camera cable (for rear camera)
- Includes 3 cam trailer quick disconnect system to allow you to disconnect your trailer with ease by making the camera connections as simple as unplugging the lights of the trailer.
- 1 year warranty on everything!
Monitor specs:
- screen size: 10 inch (diagonal length)
- Built-in quad display
- 16 : 9 wide screen display
- NTSC
- 1024x600 resolution
- Power supply is DC 12 V/24V compatible
- Remote control, OSD menu;
- Inputs for up to 4 cameras
Rear Camera specs:
- Analog High Definition
- 960x1280 resolution!
- 150 degree view
- 18 IR LED's for clear night vision even in complete blackness
- Weather grommet for easy cable passage to the interior
- Rear camera-Steel weather tight casing with IP68 water resistance - adjustable glare shield included
- Weather tight screw connectors for extremely secure and dry connections
Side Camera specs:
- 1/3” APTINA CMOS- Analog High Definition
- 960x1280 resolution!
- 9 Infrared LED's to allow vision in complete darkness
- 120 degree view
- Side camera-Adjustable view- Mount upright, sideways, upside down.
- Durable weather tight casing with IP68 water resistance
- Weather tight screw connectors for extremely secure and dry connections
- 1 year warranty
Warranty Information Camera Source warrants this product against material defects for a period of one (1) year from the date of purchase. Camera Source is not responsible for a defect in this system as a result of misuse, improper installation, damage or mis-handling of the electronic components. Most issues can be resolved over the phone or by email so please contact us before returning any items.
SKU | CS-10QAHD3S |
---|---|
Agriculture / Commercial | Commercial |
Cam Only/Complete Kit | Complete Kit |
Screen Resolution | 1024x600 |
Number of Triggers | 4 |
Split Screen | Yes |
Video System | NTSC/PAL auto switching |
Overall Dimensions | 240 x 163 x 26 mm |
Impact Rating | 5g monitor, 50g camera |
Bracket Type | steel u shape |
Vehicle Interface | Not Included |
Waterproof/Dustproof Level | IP 69 |
Night Vision | 0 Lux |
Power Supply | 12-24 Volts |
Sound Options | Without Microphone |
System Manufacturer | EVI Systems |
Camera Resolution | 960P |
Parking Guidelines | Not Available |
Camera Orientation | Rear Facing |
Fit Type | Universal fit |
Connection | Aftermarket Display (RCA) |
Sensor Type | CCD |
System Type | Standard Build |
Sensor Brand | Sony |
Viewing Angle | 150 Degrees |
Camera Input Ports | 4 |
Warranty | 1 Year |
Camera Type | Rear Camera, Side Camera, Multiple cameras (kit), Trailer/Camper/5th Wheel camera |
Vehicle Category | Truck, Camper/Trailer (if needing standalone system), Farm Equipment, Construction Equipment (i.e. bulldozer), RV |
Number of Cameras | 3 |
Reason for Shopping | Adding camera(s) |
Wiring Type | Hard Wired |
Camera Mount Location | Universal Mount |
For a monitor it uses | Packaged w/Aftermarket Monitor |
Monitor Size | 10" |
Monitor wires are clearly marked for easy identification when installing - requires 12 volt power, ground, and reverse trigger if desired. Camera power and video is supplied through the coaxial cable.
Side cameras install virtually anywhere. Rubber grommet passes through the surface so cable routing can be accomplished in a variety of ways.
The cables can only go together one way so it's simple to install!
Mount the cameras in the desired location and work your way forward with the cables. The quick disconnect harness will need to be mounted in the bumper or a custom bracket for stability.
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount