Wireless Camera kit with 5" monitor compatible with Furrion® Pre-wire
Wireless camera kit compatible with Furrion® pre-wire
Is your camper pre-wired for a Furrion® camera system? Easily connect this wireless camera kit to your pre-wired RV or trailer! This kit will allow you to use the pre-wire setup on your camper and view this camera on the included 5” display monitor. Just the right size for your dash!
Our digital wireless camera comes with an adapter bracket and power pigtail to connect directly to the existing pre-wired Furrion® system on your trailer or RV. This kit adds the convenience of a wireless rear camera to the back of your trailer. Our camera adapter plate fits perfectly into the Furrion® housing and with the included power pigtail you can plug directly into the existing pre-wired port. This monitor will allow you to view the camera at any time going down the road to check cargo and traffic and in reverse so you'll be able to see behind your trailer while backing up without having to have a spotter guiding you.
This monitor also allows for one additional wired camera. Therefore, you can expand the system at any time possibly adding side cameras for additional safety while changing lanes.
Kit Includes:
- Digital wireless camera with Furrion® compatible power pigtail
- Furrion® compatible adapter bracket- Perfect fit to adapt our camera to the existing bracket
- Wireless receiver
- 5" digital flat panel monitor - connect up to two cameras, switch between views with a button on the front of the display or use the included remote.
- Power module
- Install instructions
Wireless Camera specs:
- 1/4" Sony Color CMOS for ultimate clarity
- 2.5mm lens
- 700 TVL resolution - the best clarity you will find in a wireless camera!
- 0 LUX min illumination. 12 IR LED's for clear night vision even in complete blackness, night range up to 15 meters
- Aluminum alloy weather tight casing - steel mount bracket included
- 2.4GHz Digital FHSS Hopping and Pairing Technology, 2400-2483.5MHz frequency
- IP69 waterproof, shockproof, dustproof, resistance to high temperature and humidity
- Industry leading 3 year warranty!
Warranty Information Camera Source warrants this product against material defects for a period of one (3) year from the date of purchase. Camera Source is not responsible for a defect in this system as a result of misuse, improper installation, damage or mis-handling of the electronic components. Most issues can be resolved over the phone or by email so please contact us before returning any items.
SKU | CS-5FW |
---|---|
Agriculture / Commercial | Agriculture |
Cam Only/Complete Kit | Complete Kit |
Screen Resolution | 800x480 |
Video Input Type | 4 pin/convert to RCA with adapter |
Number of Triggers | 2 |
Split Screen | No |
Video System | NTSC/PAL Auto Switching |
Overall Dimensions | 191 x 140.5 x 132 mm |
Impact Rating | 4G Monitor, 20G Camera |
Bracket Type | Steel monitor u bracket, steel camera u bracket |
Waterproof/Dustproof Level | IP 69 Cameras |
Night Vision | 0 Lux |
Power Supply | 12 Volts |
Sound Options | Without Microphone |
System Manufacturer | EVI Systems |
Camera Resolution | 700 TVL |
Parking Guidelines | Not Available |
Camera Orientation | Rear Facing |
Fit Type | Universal fit |
Sensor Type | CMOS |
System Type | Standard Build |
Sensor Brand | Sony |
Viewing Angle | 150 Degrees |
Includes Remote | Yes |
Camera Input Ports | 2 |
Warranty | 3 Year |
Camera Type | Rear Camera, Trailer/Camper/5th Wheel camera |
Vehicle Category | Truck, Camper/Trailer (if needing standalone system), Farm Equipment, Fleet Vehicle (i.e. cargo van), Construction Equipment (i.e. bulldozer), RV, Universal |
Number of Cameras | 1 |
Reason for Shopping | Adding the camera(s) |
Wiring Type | Wireless |
Camera Mount Location | Camper/Utility Bed, Universal Mount |
For a monitor it uses | Packaged w/Aftermarket Monitor |
Monitor Size | 5" |
12 volt DC systems. Universal design will fit on anything! Compatible with Furrion pre-wire trailers.
Our digital wireless camera comes with an adapter bracket and power pigtail to connect directly to the existing pre-wired Furrion® system on your trailer or RV. The included wireless receiver will connect directly to the 5 inch monitor creating the wireless connection to the camera.
The included power module makes installation easy as there's no need to locate a 12 volt power source for the monitor and wireless receiver.
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount