Universal Front Camera Kit for Factory 8" or 12" Navigation Display, Fits 2022-2023 RAM®
Universal Front Cam + Multi-camera Support!
Can't see over that hood? This is your solution and is a Camera Source exclusive for a 2022-2023 RAM® 1500,2500,3500 series with 8.4" or 12" UConnect 5 factory display with Navigation!!
This universal camera can be converted to mount on any flat surface. The camera has adjustable tilt to obtain the optimum view and comes with parking guideline options, meaning that the guidelines can be turned off. The included screen interface provides multi-cam support so you can add up to 4 cameras to your factory 8.4" or 12" UConnect 5 Navigation display screen!
The integration module allows for plug and play integration into your factory screen without having to flash a program your radio. The factory rear camera will come on automatically when in reverse and front camera can be manually activated using the included activation button or programmed to come on automatically when shifting from reverse to drive.
- Retains ALL factory features.
- Will not affect backup camera, tested and confirmed to work with vehicle's that have just a backup camera and vehicles with a 360 birds eye view camera system.
- Automatic switching to the left and right camera using the cars turn signal switch.
- Left, right and front Camera can be setup to be turned on using a 12 Volt trigger.
- Rear Camera input for customers looking to override original backup camera, add a trailer camera with priority over OEM camera in reverse gear.
- Front Camera can be setup to turn on automatically after shifting out of reverse gear, it can stay on from 3 seconds to 25 seconds you select the time using the unit's interface.
SKU | 7CS-23DTR-VIF |
---|---|
Video System | NTSC |
Vehicle Interface | Includes Factory Integration Module |
Waterproof/Dustproof Level | IP 67 |
Night Vision | .1 Lux |
Power Supply | 12 Volts |
System Manufacturer | EVI Systems |
Camera Resolution | 600 TVL |
Parking Guidelines | Yes |
Connection | Plug and Play to Factory Dash Display |
Sensor Type | Super CMOS |
Viewing Angle | 170 Degrees |
Camera Input Ports | 4 |
Warranty | 1 Year |
Camera Type | Front Camera |
Vehicle Category | Truck |
Number of Cameras | 1 |
Reason for Shopping | Adding the camera(s) |
Wiring Type | Hard Wired |
Camera Mount Location | Universal Mount |
For a monitor it uses | Your factory display |
Radio Screen Size | 8.4" Mopar, 12.1" Mopar, Factory LCD |
Make | RAM |
Model | 1500,HD |
Year | 2022,2023 |
Make Filter | Ram |
Model Filter | 1500, HD |
Year Filter | 2022, 2023 |
Compatible with 2022-2023 RAM® trucks with factory 8.4" or 12" Uconnect 5 radio system with nagivation.
Must have factory navigation, not just CarPlay or Android Auto.
Front camera-Simple installation may not even require the removal of the front grille. Install on either your license plate mount or on any flat surface - comes with two brackets. The RCA cable will run inside the vehicle to the interface module. All the wiring is included and installation can be accomplished in 2-3 hours (times vary with experience).
You will need to remove your factory screen to gain access to the back of the connections. The module will be plug and play and stubs out to a female RCA connection for the camera to connect directly to the screen. Detailed instructions included.
Camera is powered directly from the interface module. No cutting or splicing of factory wiring!
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount