Backup Camera Kit For Entune/Display Audio, Fits 2016-2018 Toyota®
Plug & Play to factory radio!
Toyota backup camera kit for vehicles with Display Audio/Entune touch screen radios - Plugs right in** with no cutting of factory harness! Super CMOS camera for the best picture available!!
This backup camera kit is designed for Toyota® vehicles with the Display Audio 6.1" non-navigation radio and Entune 6.1" or 7" navigation radios. This includes the following applications:
- 2016-2018 Avalon
- 2014.5-2018 Camry and Corolla
- 2016-2018 Prius, Prius C Three and Four, Prius V One Two Three and Five, Prius GEN3 Two Three Four Five
- 2016-2018 Matrix
- 2016-2018 Venza
- 2016-2018 RAV 4
The camera kit is plug and play and will not require you to cut any factory wires to install. The front harness plugs into the factory radio and the full chassis harness runs back to the OE fit rear camera - a quick and simple install! The camera will come on in reverse and will display parking guidelines for added safety and convenience, though the lines can be turned off with the flip of a switch on the harness.
Kit includes:
- Super CMOS OE fit rear camera - ultra high clarity, color, and contrast, 5-7v operating range (a Camera-Source exclusive)
- Optional parking guidelines - can be turned off on the harness
- OEM Front integration harness
- Chassis harness
- Hole saw for installing camera
- Zip ties
| SKU | CS-TDA132-16 |
|---|---|
| Video System | NTSC |
| Waterproof/Dustproof Level | IP 67 |
| Night Vision | < .2 Lux |
| Power Supply | 6 Volts |
| System Manufacturer | Camera Source |
| Camera Resolution | 600 TVL |
| Parking Guidelines | Selectable on/off |
| Camera Orientation | Rear Facing |
| Connection | Plug and Play to Factory Dash Display |
| Sensor Type | Super CMOS |
| Viewing Angle | 170 Degrees |
| Warranty | 3 Year |
| Camera Type | Rear Camera |
| Vehicle Category | Car |
| Number of Cameras | 1 |
| Reason for Shopping | Adding the camera(s) |
| Wiring Type | Hard Wired |
| Camera Mount Location | Undermount/Lip Mount |
| For a monitor it uses | Your factory display |
| Radio Screen Size | 6.1" LCD |
| Make | Toyota |
| Model | Camry,Corolla,Prius,Prius C,Prius V,Venza,RAV 4,Avalon,Matrix |
| Year | 2016,2017 |
| Make Filter | Toyota |
| Model Filter | Avalon, Camry, Corolla, Matrix, Prius, Venza |
| Year Filter | 2016, 2017 |
- 2016-2018 Avalon
- 2014.5-2018 Camry and Corolla
- 2016-2018 Prius, Prius C Three and Four, Prius V One Two Three and Five, Prius GEN3 Two Three Four Five
- 2016-2018 Matrix
- 2016-2018 Venza
- 2016-2018 RAV 4
Simply remove the radio and plug the new camera harness into the appropriate slot and run the chassis harness to the rear of the car through the interior. Camera installs in upper lip above the license plate; using the included hole saw cut an opening in the trim, install the camera, tighten with locking nut, and connect to chassis harness. Installs quickly and easily!
There is a wire in the chassis harness that will turn the guidelines on or off.
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
Related Products
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount 10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount