Plug and Play Surface Mount Camera Kit, Fits 2020-2023 Tacoma
Uses your factory camera connector!
Camera is FMVSS 111 compliant! New Product in stock and ready to ship! This is a plug and play camera kit that will allow you to mount a camera on your camper or trailer and have it plug into the existing camera connector behind your rear bumper.
This universal camera is surface mounted so it will require a flat section approximately 1" x 1" for mounting. Drill a small hole and run the cable through to your factory backup camera connection.
Use this camera for salt spreaders, bed campers, 5th wheel applications, airstream tailgates, and any other application where you are required to remove your factory tailgate.
Kit includes the following:
- Surface mount Super CMOS camera with night vision and optional parking lines
- Mounting hardware
- Factory integration cable (plugs in under the box just in front of the rear bumper, uses the same connector as your factory camera). Cable is 6' long so it can be mounted by the license plate or in a higher mounting location on a drop in camper, utility bed, etc.
- 3 year warranty!
Camera Specifications:
- Super CMOS chip - outstanding color, contrast, and clarity!
- Removable parking guidelines
- 170 degree view
- 600 TV lines of resolution
- .1 lux minimum illumination - Outstanding night vision!
SKU | CS-20TAC-RSM |
---|---|
Video System | NTSC |
Waterproof/Dustproof Level | IP 68 Camera |
Night Vision | < .2 Lux |
Power Supply | 6 Volts |
System Manufacturer | EVI Systems |
Camera Resolution | 600 TVL |
Parking Guidelines | Selectable on/off |
Camera Orientation | Front or Rear Facing |
Fit Type | Universal fit |
Connection | Factory Connector |
Sensor Type | Super CMOS |
Viewing Angle | 170 Degrees |
Warranty | 3 Year |
Camera Type | Rear Camera, Utility Bed Camera Systems |
Vehicle Category | Truck, Camper/Trailer (if connecting to vehicle wiring) |
Number of Cameras | 1 |
Reason for Shopping | Relocating factory camera |
Wiring Type | Factory Plug&Play |
Camera Mount Location | Camper/Utility Bed, Universal Mount |
For a monitor it uses | Your factory display |
Make | Toyota |
Model | Tacoma |
Year | 2020,2021,2022,2023 |
Make Filter | Toyota |
Model Filter | Tacoma |
Year Filter | 2020, 2021, 2022, 2023 |
2020-2023 Tacoma with factory installed backup camera.
NOTE: vehicle must have come from the factory with a rear camera in order for this kit to function.
Camera is drill-in style for flat mounting. It will require a flat section approximately 1" x 1" for mounting. Drill a small hole and connect the camera harness to the OEM conversion harness.
Run the cable to your factory backup camera connection under the truck and plug it in.
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount