Backup Camera for 5" Factory Display, Fits 2012-2014 Subaru® Legacy/Outback
Use your factory 5" display!
Now you can add the safety and convenience of a rear camera to your 2012-14 Subaru® Outback and Legacy with a 5" factory LCD display. This camera kit is designed to plug directly into your factory 5" screen so no additional monitor is required. Camera will come on automatically when you go to reverse and provide a crystal clear view of your surroundings both day and night.
Camera is our exclusive Super CMOS model with a high grade image sensor, which produces the best color and clarity you will find in an automotive camera system!
Kit Includes:
- Screen interface cable for Subaru 5" factory display. No cutting of factory screen wires, just plugs right in! *Display screen not included
- High grade OE fit camera with Super CMOS high grade sensor
- Full camera wiring harness
- Hole saw for camera installation
- Wire connectors for tapping camera power
Camera Specifications:
- Super CMOS night vision sensor
- 600 TVL resolution
- .1 LUX night vision
- Selectable parking lines in the display, turn them off on the harness if desired
- 170 degree viewing angle
- 3 year warranty!
Display screen not included as this kit utilizes your existing factory display.
SKU | CS-SUBLCD-132 |
---|---|
Video System | NTSC |
Vehicle Interface | Includes Factory Integration Module |
Waterproof/Dustproof Level | IP67 |
Night Vision | .1 Lux |
Power Supply | 12 Volts |
System Manufacturer | EVI Systems |
Camera Resolution | 600 TVL |
Parking Guidelines | Selectable on/off |
Camera Orientation | Rear Facing |
Connection | Plug and Play to Factory Dash Display |
Sensor Type | Super CMOS |
Viewing Angle | 170 Degrees |
Warranty | 3 Year |
Camera Type | Rear Camera |
Vehicle Category | Car |
Number of Cameras | 1 |
Reason for Shopping | Adding the camera(s) |
Wiring Type | Factory Plug&Play |
Camera Mount Location | Undermount/Lip Mount |
For a monitor it uses | Your factory display |
Radio Screen Size | 5" LCD |
Make | Subaru |
Model | Outback,Legacy |
Year | 2012,2013,2014 |
Make Filter | Subaru |
Model Filter | Legacy, Outback |
Year Filter | 2012, 2013, 2014 |
2012-2014 Subaru® Legacy and Outback with factory installed 5" LCD screen
Remove the factory display screen and unplug from factory wiring. Connect included wiring T-harness to the factory radio and connect factory harness to opposite end of T-harness to complete the radio end of the install.
Drill a hole in the panel above your license plate using the included hole saw and install camera in opening. Route harness to front of vehicle, connect RCA to radio interface RCA input, and connect power/ground wires to power and ground source.
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount