OE Fit Grille Front Camera Kit for Factory 8" or 12" Navigation Display, Fits 2022-2023 RAM® 1500
OE fit Front Cam + Multi-camera Support!
- Built-in audio input, true auxiliary input with no audio lag.
- Retains ALL factory features.
- Will not affect backup camera, tested and confirmed to work with vehicle's that have just a backup camera and vehicles with a 360 birds eye view camera system.
- Automatic switching to the left and right camera using the cars turn signal switch.
- Left, right and front Camera can be setup to be turned on using a 12 Volt trigger.
- Rear Camera input for customers looking to override original backup camera, add a trailer camera with priority over OEM camera in reverse gear.
- Front Camera can be setup to turn on automatically after shifting out of reverse gear, it can stay on from 3 seconds to 25 seconds you select the time using the unit's interface.
SKU | 7CS-23DTR-OEF |
---|---|
Video System | NTSC |
Vehicle Interface | Includes Factory Integration Module |
Waterproof/Dustproof Level | IP 67 |
Night Vision | .1 Lux |
Power Supply | 12 Volts |
System Manufacturer | EVI Systems |
Camera Resolution | 600 TVL |
Parking Guidelines | Yes |
Connection | Plug and Play to Factory Dash Display |
Sensor Type | Super CMOS |
Viewing Angle | 170 Degrees |
Camera Input Ports | 4 |
Warranty | 1 Year |
Camera Type | Front Camera |
Vehicle Category | Truck |
Number of Cameras | 1 |
Reason for Shopping | Adding the camera(s) |
Wiring Type | Hard Wired |
Camera Mount Location | Front Grille |
For a monitor it uses | Your factory display |
Radio Screen Size | 8.4" Mopar, 12.1" Mopar, Factory LCD |
Make | RAM |
Model | 1500 |
Year | 2022,2023 |
Make Filter | Ram |
Model Filter | 1500 |
Year Filter | 2022, 2023 |
Compatible with 2022-2023 RAM® 1500 trucks with factory 8.4" or 12" Uconnect 5 radio system with nagivation. Must have factory navigation, not just CarPlay or Android Auto.
Truck must have one of the 3 styles of front grilles shown in the images.
Removal of front grille is required. Once grille is removed, locate back side of RAM letters exo-skeleton. 3 screws hold it into place. Remove 3 screws and release the stock exo-skeleton. Replace with new provided frame with camera built-in and re-attach with 3 screws.
Connect camera cable to the main harness. Run the harness to the inside of the vehicle to the interface module.
You will need to remove your factory screen to gain access to the back of the connections. The module will be plug and play and stubs out to a female RCA connection for the camera to connect directly to the screen. Detailed instructions included.
Camera can be powered directly from the interface module.
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount