5th Wheel, Trailer, Camper Camera Kit for Interface/RCA
5th wheel camera for Interface or RCA Connection
Many interface modules are designed to accept a second rear camera input, allowing the user to specify which camera is enabled by default when in reverse. This comes in handy when you have a trailer behind the truck since the rear of the trailer is a serious blind spot! This kit is designed to solve that problem by adding the second rear camera on the rear of the truck or trailer.
Comes with everything you need to install the camera on the rear of the trailer and run a 4 pin coax to the cab to connect to the interface module or universal monitor with RCA input. Add our 5th wheel trailer quick disconnect system allowing you to disconnect your trailer with ease by making the camera connections as simple as unplugging the lights of the trailer.
Kit includes:
- Commercial grade night vision camera with 700 TV lines of resolution Sony CCD sensor (CS-UCCD-SONY)
- 64' length 4 pin coaxial weather proof cable (CS-UC20)
- 4 pin male to RCA conversion harness so that you can connect to your interface module or universal monitor easily (CS-RCA-4PIN-M)
- OPTIONAL- Trailer quick disconnect system for easy camera connections - weather tight! (CS-UTQC)
- All connections are weather tight except those made inside the cab!
- 1 Year warranty
Select the quick disconnect option from the drop down above. This connector is not needed for applications that do not extend past the rear of the truck such as a drop in trailer or truck bed cam. Call if you have questions or need a custom kit put together.
SKU | CS-UTC-CK |
---|---|
Video System | NTSC |
Vehicle Interface | Not Included |
Waterproof/Dustproof Level | IP 68 |
Night Vision | 0 Lux |
Power Supply | 12 Volts |
System Manufacturer | EVI Systems |
Camera Resolution | 700 TVL |
Parking Guidelines | Not Available |
Camera Orientation | Rear Facing |
Fit Type | Universal fit |
Connection | Aftermarket Display (RCA) |
Sensor Type | CCD |
Sensor Brand | Sony |
Viewing Angle | 150 Degrees |
Warranty | 1 Year |
Camera Type | Rear Camera, Trailer/Camper/5th Wheel camera |
Vehicle Category | Camper/Trailer (if needing standalone system) |
Number of Cameras | 1 |
Reason for Shopping | Adding the camera(s) |
Wiring Type | Hard Wired |
Camera Mount Location | Camper/Utility Bed, Universal Mount |
For a monitor it uses | Your aftermarket display (RCA) |
Will work for any aftermarket display with RCA input, or connect to an interface module to allow connection to a factory display.
Camera installs virtually anywhere. Power is run to the camera through the coaxial cable so it is not necessary to locate power on the trailer or area where the camera is mounted.
Make installation even easier with an add on 12 Volt power source to eliminate the need to locate a power source on the vehicle and avoid cutting or splicing into factory wiring! See related item SKU: CS-RPW-P
Q: What are the camera dimensions? (with bracket)
A: 3" L x 2 1/2" W x 3" H
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount