Universal backup camera with OBD Programmer for Factory Display, Fits Select Chrysler®/Dodge®/Jeep®
No dealer programming required!
This is a high quality OEM integrated backup camera solution for several Chrysler®/Dodge®/Jeep® vehicles that integrates right into your 8" factory display screen! No dealer programming is required making this a simple OEM integrated solution for your vehicle The camera can be mounted on the license plate or it also comes with a mini mount that will allow you to mount the camera to the ledge above the license plate if you choose.
**Important-Double check compatibility tab for your specific make, model, and year to confirm compatibility**
The kit comes with the following:
- Dual mount camera system with high grade Super CMOS sensor for an ultra clear view, mount on license plate or lip mount as desired
- Full chassis harness
- Factory radio integration harness (Monitor not included)
- OBD programming module
- Required mounting hardware/connectors
Camera Specifications:
- Camera Source exclusive Super CMOS high grade sensor with night vision
- Selectable parking guidelines (can be turned off during install if desired) NOTE: Black center line is not present on actual display
- 600 TV lines of resolution
- <.2 lux minimum illumination - Outstanding night vision!
- 170 degree viewing angle
System has a 3 year warranty!
**Monitor not included.**
SKU | CS-ULPM-C2TG |
---|---|
Video System | NTSC |
Vehicle Interface | Includes Factory Integration Module |
Waterproof/Dustproof Level | IP 68 Camera |
Night Vision | .3 Lux |
Power Supply | 12 Volts |
System Manufacturer | EVI Systems |
Camera Resolution | 600 TVL |
Parking Guidelines | Selectable on/off |
Camera Orientation | Rear Facing |
Fit Type | Universal fit |
Connection | Plug and Play to Factory Dash Display |
Sensor Type | CMOS III |
Viewing Angle | 170 Degrees |
Warranty | 3 Year |
Camera Type | Rear Camera |
Vehicle Category | Car, Truck |
Number of Cameras | 1 |
Reason for Shopping | Adding the camera(s) |
Wiring Type | Hard Wired |
Camera Mount Location | Universal Mount |
For a monitor it uses | Your factory display |
Radio Screen Size | 8.4" Mopar |
Make | Dodge,Chrysler,Jeep |
Model | 200,300,Aspen,Sebring,Town&Country,Avenger,Caliber,Challenger,Charger,Dakota,Durango,GrandCherokee,Journey,Magnum,Nitro,CitiVan,Commander,Compass,GrandCherokee,Patriot,Liberty,Wrangler |
Year | 2007,2008,2009,2010,2011.2012.2013.2014, 2015, 2016,2017 |
Make Filter | Chrysler, Dodge, Jeep |
Model Filter | 200, 300, Aspen, Avenger, Caliber, Challenger, Charger, CitiVan, Commander, Compass, Dakota, Durango, Journey, Liberty, Magnum, Nitro, Patriot, Sebring, Wrangler |
Year Filter | 2007, 2008, 2009, 2010, 2015, 2016, 2017 |
Compatible with the listed vehicles that have the REC,RER, MyGig, RA3, RA4 8" factory display screen without "hands free" bluetooth system.
Not compatible with 4.3" screen.
Chrysler | 200 | 2011-2014 |
300 | 2008-2011 | |
Aspen | 2008-2009 | |
Sebring | 2007-2010 | |
Town&Country | 2008-2016 | |
Dodge | Avenger | 2007-2014 |
Caliber | 2009-2012 | |
Challenger | 2008-2014 | |
Charger | 2008-2010 | |
Dakota | 2008-2011 | |
Durango | 2008-2013 | |
Grand Caravan | 2008-2018 | |
Journey | 2008-2010 | |
CitiVan | 2012-2016 | |
Jeep | Commander | 2008-2011 |
Compass | 2009-2018 | |
Grand Cherokee | 2008-2013 | |
Patriot | 2009-2018 | |
Liberty | 2008-2012 | |
Wrangler | 2007-2018 |
Install on either your license plate mount or on any flat surface - comes with two brackets. The camera harness will run inside the vehicle to the back of your factory display and you will need to locate a reverse activated 12v power source and ground.
Make installation even easier with an add on 12 Volt power source to eliminate the need to locate a power source on the vehicle and avoid cutting or splicing into factory wiring! See related item SKU: CS-RPW-P
You will need to remove your factory radio to install the RCA T-Harness to the back of your factory display. Connect the RCA from the main chassis harness to the T-Harness.
Plug the OBD programmer into the OBD port under the steering wheel and programming is completed in less than a minute!
NO DEALER ACTIVATION REQUIRED
Q: Where does this camera mount?
A: Install on either your license plate mount or on any flat surface - comes with two brackets.
Q: Will this work with my 4.3" factory display?
A: The vehicle must have a factory radio screen- MyGig,REC, 5.2" or 8.4" U-Connect radio
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount