Mini Universal Backup Camera-Dual Mount with Aftermarket mirror
Includes aftermarket mirror
Adding a backup camera to ANY car or truck with a standard wedge mount rear view mirror could never be simpler and more affordable!
This CMOS license plate mounted backup camera kit will allow you to integrate rear view safety to any vehicle with a license plate and a wedge mount style mirror. In fact, the camera can be converted to mount on any flat surface! All the cables are included and the 25' long harness terminates with an RCA connection so you can integrate into the included aftermarket auto dimming rear view mirror. The camera has adjustable tilt and comes with parking guideline options, meaning that the guidelines can be turned off. This camera can also be used as a front camera by simply switching it to a forward looking image on the harness during the installation!
Product specifications:
- Mini universal dual mount camera-License plate bracket and universal bracket included
- Super CMOS sensor for ultra clear display (the best available)
- Resolution: 600 TV lines
- Minimum Illumination: 0.2 Lux
- View Angle: 170
- Video Output: Full color video
- Working Voltage: DC 9-16V
- Parking Line: On/Off switchable
- Image: Mirror/Non mirror switchable
- Water proof: IP67
- 25 foot harness
- 3 year warranty on the camera
Rear View Mirror (CS-RVMG-43) specifications:
- 4.3" Color Rear Camera Display
- 2 RCA video inputs (one for rear camera plus one additional)
- Reverse trigger wire that automatically activates screen for rear camera when in reverse
- Adjustable parking guidelines! Move the lines around the screen to line them up perfectly for your vehicle
- Included remote control
- Auto-Dimming Feature (the only aftermarket mirror with auto-dimming and patent licensed by Gentex)
- Display screen is ultra-bright! See clearly during direct sunlight and screen also automatically dims in the darkness to avoid blinding the driver.
- Standard Windshield Wedge Mount
- Not compatible with auto-dimming side mirrors.
- 1 year warranty
SKU | CS-ULPM-RVMG |
---|---|
Video System | NTSC |
Vehicle Interface | Includes Rearview Mirror |
Waterproof/Dustproof Level | IP 68 Camera |
Night Vision | < .2 Lux |
Power Supply | 12 Volts |
System Manufacturer | Camera Source |
Camera Resolution | 600 TVL |
Parking Guidelines | Selectable on/off |
Camera Orientation | Front or Rear Facing |
Fit Type | Universal fit |
Connection | Rearview Mirror |
Sensor Type | Super CMOS |
Viewing Angle | 170 Degrees |
Camera Input Ports | 2 |
Warranty | 1 Year |
Mirror Options | Video |
Mirror Mount | Wedge Style |
Camera Type | Rear Camera |
Vehicle Category | Car, Truck |
Number of Cameras | 1 |
Reason for Shopping | Adding the camera(s) |
Wiring Type | Hard Wired |
Camera Mount Location | Universal Mount |
For a monitor it uses | Packaged w/Rear view mirror display |
Monitor Size | 4.3'' Mirror |
This camera kit will fit any vehicle with a license plate when using the license plate bracket. When using the small mount bracket the minimum surface required is 1.5 inches wide by .75 inches deep. It is recommended to turn off the parking lines on the camera and use the lines in the mirror instead. The lines in the mirror are adjustable for your vehicle!
If your vehicle has auto dimming side mirrors you will lose that feature by adding this rear view mirror.
Install on either your license plate mount or on any flat surface - comes with two brackets. The RCA cable will run inside the vehicle to your monitor and you will need a reverse activated 12v power source and ground wire.
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount