Plug and Play Commercial Camera, Fits 2021-2023 GM® Heavy Duty Work Truck
Easily add to a GM® Heavy Duty Work Truck!
Camera is FMVSS 111 compliant! This is a plug and play camera kit that will allow you to replace your factory tailgate camera on a Sierra/Silverado 2500,3500,4500,5500 Series Work Truck with this Commercial camera - Plug and Play! Your truck must be prewired and programmed for a camera or this kit will not work. Please see the compatibility tab for more information!
Use this camera for salt spreaders, bed campers, 5th wheel applications, airstream tailgates, and any other application where you are required to remove your factory tailgate. Simply mount the camera on any flat surface and run the cable to your factory backup camera connection for a simple and seamless installation. Choose the cable length from the drop down above.
*Factory radio must be programmed for a back up camera from the factory or by a dealership.
Kit includes the following:
- Heavy duty commercial camera with Sony CCD sensor
- OEM to commercial coax conversion harness-plug and play!
- Coaxial wire harness with weather tight connectors (select length above)
- Camera harness has factory ends for plug and play with your existing wiring.
- 1 year camera warranty!
Camera Specifications:
- Sony Ultra CCD for a super clear image
- Infra-red LED's that will create a daytime like display even in complete darkness
- 150 degree view
- 700 TV lines of resolution
- 0 lux (no light required to operate)
- Heavy cast casing, steel mounting bracket
- Locking weather tight connector
**This is for a Work Truck only- Window sticker and/or VIN will show (WT).
SKU | CS-21GMWTHD30-SK |
---|---|
Agriculture / Commercial | Commercial |
Cam Only/Complete Kit | Complete Kit |
Video System | NTSC |
Waterproof/Dustproof Level | IP 67 |
Night Vision | 0 Lux |
Power Supply | 12 Volts |
System Manufacturer | EVI Systems |
Camera Resolution | 600 TVL |
Parking Guidelines | Not Available |
Camera Orientation | Rear Facing |
Fit Type | Universal fit |
Connection | Factory Connector |
Sensor Type | CCD |
Viewing Angle | 150 Degrees |
Warranty | 1 Year |
Camera Type | Rear Camera, Utility Bed Camera Systems |
Vehicle Category | Truck, Fleet Vehicle (i.e. cargo van) |
Number of Cameras | 1 |
Reason for Shopping | Adding the camera(s) |
Wiring Type | Factory Plug&Play |
Camera Mount Location | Camper/Utility Bed, Universal Mount |
For a monitor it uses | Your factory display |
Radio Screen Size | Factory LCD |
Make | GMC,Chevrolet |
Model | Silverado HD,Sierra HD |
Year | 2021,2022,2023 |
Make Filter | Chevrolet, GMC |
Model Filter | Sierra HD, Silverado HD |
Year Filter | 2021, 2022, 2023 |
2021-2023 GMC® Sierra and Chevrolet® Silverado 2500,3500,4500,5500 series "Work Truck" with factory installed backup camera wiring and "IOR" RPO code. Contact your GM® dealer with your VIN number to determine that your VIN has the "WT" specification and the "IOR" RPO code.
Also confirm that you have the 30 pin connector for the camera wiring at the back of the truck.
**This is for a Work Truck only- Window sticker and/or VIN will indicate (WT).
**EVI Systems has certified this camera system to comply with FMVSS 111 regulations as set forth by the National Highway Traffic Safety Administration (NHTSA). Testing has been performed jointly in-house and by a certified laboratory to meet or exceed the minimum requirements set forth by TP-111-V-01. FMVSS 111 field of view requirements and any other vehicle related certification is ultimately the responsibility of the vehicle up-fitter to ensure compliance.
Mount the camera anywhere! Versatile mount allows for surface mount in virtually any location. Camera tilt is adjustable so the view can be adjusted to accommodate any view required! Plug OEM adapter harness into the factory camera 30 pin harness under the truck.
-Factory radio must be pre-programmed from the factory or a dealership for this camera kit to work.
Q: How do I know if the radio is programmed for a camera?
A: When you put the truck in reverse the radio display should change. The display should show a warning that states "Check surroundings" or "Camera not available". If the display stays in radio mode when the vehicle is in reverse you know it hasn't been programmed for a camera and will either need to take it to a dealership for programming or order one of our kits that already includes the OBD programmer.
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount