Universal Front Camera Fits Select Ford® Vehicles with SYNC 3
Add a front camera!
This CMOS license plate mounted camera kit will allow you to integrate front view safety to your factory 8" display. The camera can be converted to mount on any flat surface or simply mount to your license plate! Both brackets are included. All the cables are included and the 25' long harness terminates with an RCA connection so you can integrate into the included factory display Interface. The camera has adjustable tilt and comes with parking guideline options, meaning that the guidelines can be turned off.
Force Factory View Front camera at any time: Perfect for parking!
Navigation unlock: This interface module allows passenger access to the Navigation menu while vehicle is in motion. Enter a destination address on the go!
Camera specifications:
- Mini license bar universal mount camera
- Super CMOS sensor for ultra clear display (the best available)
- Resolution: 600 TV lines
- Minimum Illumination: 0.2 Lux
- View Angle: 170
- Video Output: Full color video
- Working Voltage: DC 9-16V
- Parking Line: On/Off selectable
- Image: Forward facing
- Water proof: IP67
- 25 foot harness
- 3 year warranty on the camera
- Front Camera composite video input.
- Our video interface will also enable : Passenger access to Navigation menu while vehicle is in motion. Force Front Camera at anytime.
- Video Interface is 100% Plug & Play
No monitor is included with this kit as it is designed to work with your existing factory radio screen. This camera comes with a 3 year warranty. Professional installation is recommended.
SKU | 7CS-ULPM-RU |
---|---|
Video System | NTSC |
Vehicle Interface | Includes Factory Integration Module |
Waterproof/Dustproof Level | IP 67 |
Night Vision | < .2 Lux |
Power Supply | 12 Volts |
System Manufacturer | EVI Systems |
Camera Resolution | 600 TVL |
Parking Guidelines | Selectable on/off |
Camera Orientation | Front Facing |
Connection | Plug and Play to Factory Dash Display |
Sensor Type | Super CMOS |
Sensor Brand | EVI Systems |
Viewing Angle | 170 Degrees |
Camera Input Ports | 1 |
Warranty | 3 Year |
Camera Type | Front Camera |
Vehicle Category | Truck |
Number of Cameras | 1 |
Reason for Shopping | Adding the camera(s) |
Wiring Type | Hard Wired |
Camera Mount Location | Front Grille, Universal Mount |
For a monitor it uses | Your factory display |
Radio Screen Size | 8" Ford Sync 3 |
Make | Ford |
Model | F-150,Edge,Super Duty,Explorer,Expedition |
Year | 2016,2017,2018,2019,2020,2021 |
Make Filter | Ford |
Model Filter | Edge, Expedition, Explorer, F-150, Super Duty |
Year Filter | 2016, 2017, 2018, 2019, 2020, 2021 |
Vehicle must have a factory installed back up camera and an 8" factory SYNC 3 radio display
- 2016-2021 F-150
- 2017-2021 F250,F350, F450, F550
- 2017-2021 Explorer
- 2016-2021 Expedition
This camera kit will fit any vehicle with a license plate when using the license plate bracket. When using the small mount bracket the minimum surface required is 1.5 inches wide by .75 inches deep.
Camera installs on either your license plate mount or on any flat surface - comes with two brackets.
The camera interface is plug and play with your factory radio wiring and does not require any dealer programming. It does require you to remove the radio in order to install. Detailed instructions included.
Plug the camera RCA into the RCA input on the interface module. Connect camera red wire to the 12V output wire on the interface harness and connect black camera wire to a solid ground on the truck frame.
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount