Commercial Camera Fits 2017-2024 Super Duty Cab and Chassis
Easily add to a Super Duty cab and chassis!
This kit is for Cab and Chassis vehicles only and these are rare so chances are you need the non-Cab and Chassis version. See the compatibility tab for details before purchasing this kit. This is a plug and play camera kit that will allow you to add a camera to a cab and chassis truck that has been pre-wired at the factory and has a 4.2" or 8" factory display that is already programmed for a camera. Your truck must be prewired and programmed for a camera or this kit will not work. Please see the compatibility tab for more information!
Use this camera for cab and chassis trucks that did not come with a bed from the factory. Simply mount the camera on any flat surface and run the cable to your factory backup camera connection for a simple and seamless installation. Choose the cable length from the drop down above.
*Factory radio must be programmed for a back up camera from the factory or by a dealership. If it hasn't been programmed see SKU: CS-17SDSK-CCP. CS-17SDSK-CCP includes a programmer.
Kit includes the following:
- Heavy duty commercial camera with Sony CCD sensor
- OEM to commercial coax conversion harness-plug and play!
- Coaxial wire harness with weather tight connectors (select length above)
- Camera harness has factory ends for plug and play with your existing wiring.
- 1 year camera warranty!
Camera Specifications:
- Sony Ultra CCD for a clear image
- Infra-red LED's that will create a daytime like display even in complete darkness
- 150 degree view
- 700 TV lines of resolution
- 0 lux (no light required to operate)
- Heavy cast casing and steel mounting bracket
- Locking weather tight connector
**Not compatible with Super Duty trucks that have the 360 degree view system** See CS-FTRSK-17SD-TRL.
SKU | CS-17SDSK-CC |
---|---|
Agriculture / Commercial | Commercial |
Cam Only/Complete Kit | Complete Kit |
Video System | NTSC |
Waterproof/Dustproof Level | IP 67 |
Night Vision | 0 Lux |
Power Supply | 12 Volts |
System Manufacturer | EVI Systems |
Camera Resolution | 600 TVL |
Parking Guidelines | Not Available |
Camera Orientation | Rear Facing |
Fit Type | Universal fit |
Connection | Factory Connector |
Sensor Type | CCD |
Viewing Angle | 150 Degrees |
Warranty | 1 Year |
Camera Type | Rear Camera, Utility Bed Camera Systems |
Vehicle Category | Truck, Fleet Vehicle (i.e. cargo van) |
Number of Cameras | 1 |
Reason for Shopping | Relocating factory camera |
Wiring Type | Factory Plug&Play |
Camera Mount Location | Camper/Utility Bed, Universal Mount |
For a monitor it uses | Your factory display |
Radio Screen Size | 4.2” Ford, 8" Ford Sync 3, 8" Ford Sync 4, 12" Ford Sync 4 |
Make | Ford |
Model | Cab & Chassis |
Year | 2017,2018,2019,2020,2021,2022,2023,2024 |
Make Filter | Ford |
Model Filter | Cab & Chassis |
Year Filter | 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 |
2017-2024 Ford® Super Duty F350, F450, F550 cab and chassis trucks that have been pre-wired for a camera from the factory and have a 4.2" or 8" display from the factory.
This kit relies on the factory camera chassis harness to operate.
Not compatible if your truck has the 360 view system.
See our other Super Duty truck options if your truck came from the factory with a bed and you are removing the bed to add service body, utility bed, dump truck, flat bed, and any other application where you do not have a tailgate. This kit will only work on the trucks that came from the factory without a bed. Please verify the connector shown in the photos against the connector on your truck before ordering. If you are still not sure please call us for assistance.
Mount the camera anywhere! Versatile mount allows for surface mount in virtually any location. Camera tilt is adjustable so the view can be adjusted to accommodate any view required! Plug OEM adapter harness into the factory camera harness under the truck.
-Factory radio must be pre-programmed from the factory or a dealership for this camera kit to work. Or see SKU: CS-17SDSK-CCP for a kit that includes a programmer.
Q: How do I know if the radio is programmed for a camera?
A: When you put the truck in reverse the radio display should change. The display should show a warning that states "Check surroundings" or "Camera not available". If the display stays in radio mode when the vehicle is in reverse you know it hasn't been programmed for a camera and will either need to take it to a dealership for programming or order one of our kits that already includes the OBD programmer.
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount