Rear Emblem Camera Kit for 8" Display, Fits 2013-16 Super Duty
Includes Multi-Cam interface for SYNC 2!
This is a complete kit that contains our OE Ford® oval emblem rear camera and multi-cam interface for MyFord® Touch 8" SYNC 2 displays.
Here's a complete solution for your Ford® truck that will allow you to see clearly while backing! This kit is plug and play and will work on any 2013-2016 Ford® Super Duty with the MyFord® Touch 8" SYNC 2 screen, and the 9" X 3.5" blue oval in the center of the tailgate. The interface allows for plug and play integration into your factory MyFord® Touch 8" SYNC 2 radio without having to have the dealer flash a program. The rear camera will come on automatically when in reverse, or you can manually activate the camera by pressing and holding the radio power button. Inputs for a total of 2 cameras. See our other kits for options.
This kit contains the following:
Rear Camera Kit
- Factory Ford® grille nameplate/camera mount
- Factory Ford® blue oval emblem
- Camera Source Super CMOS night vision camera pre-mounted in nameplate mount - Latest camera technology!
- Mounting bolts
- 25' pre-loomed harnesses including RCA video cable and power harnesses
- Zip ties
- Detailed installation instructions
Multi-Cam Interface
- Uses existing 8” MyFord® Touch SYNC 2 factory display (display radio not included)
- Supports up to 2 total cameras
- It will program the factory radio to allow the addition of a reverse camera input and will allow the addition of a front camera.
- Rear camera automatically comes on when vehicle is put in reverse.
- Front camera can be automatically triggered or with a manual switch. Comes on automatically when shifting from reverse to drive. Press and hold OK button to manually activate camera at speeds under 7mph. *Camera not included*
Cameras and interface module include a 3 year warranty!
SKU | CS-FTRSD-8Ra |
---|---|
Cam Only/Complete Kit | Complete Kit |
Video System | NTSC |
Vehicle Interface | Includes Factory Integration Module |
Waterproof/Dustproof Level | IP 67 |
Night Vision | .1 Lux |
Power Supply | 12 Volts |
System Manufacturer | EVI Systems |
Camera Resolution | 600 TVL |
Parking Guidelines | Yes |
Camera Orientation | Rear Facing |
Connection | Plug and Play to Factory Dash Display |
Sensor Type | Super CMOS |
Viewing Angle | 170 Degrees |
Lockpick A/V Inputs | 0 |
Includes Remote | No |
Lockpick AV Output | No |
Lockpick Bluetooth Input | No |
Camera Input Ports | 2 |
Warranty | 3 Year |
Camera Type | Rear Camera |
Vehicle Category | Truck |
Number of Cameras | 1 |
Reason for Shopping | Adding the camera(s) |
Camera Mount Location | Factory Tailgate |
For a monitor it uses | Your factory display |
Radio Screen Size | 8” Ford Sync 2 |
Make | Ford |
Model | Super Duty |
Year | 2013,2014,2015,2016 |
Make Filter | Ford |
Model Filter | Super Duty |
Year Filter | 2013, 2014, 2015, 2016 |
Any 2013-16 Ford® F-250, F-350, F-450 truck with MyFord® Touch 8" SYNC 2 radio and the large blue oval (9" x 3 1/2") in the center of the rear tailgate.
The Multi cam interface module is plug and play with your factory radio and the rear camera kit will replace your factory Ford emblem on the tailgate. All the wiring is included and installation can be accomplished in 2-3 hours (times vary with experience). No dealer programming required!
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount