Front, Rear, and Side Camera Kit for Factory Display, Fits 2013-18 RAM®
See all 4 sides on your factory display!
Want to see behind you while backing up? Can't see over that hood? Want to see what's next to you before changing lanes?
This is your solution and is a Camera Source exclusive for any 2013-2018 RAM® 1500,2500,3500 series with factory display!! This front camera is chrome or black plated and utilizes our latest Super CMOS forward looking camera for a kit that looks like it came from the factory! Includes parking guidelines in the display. The OE style tailgate handle camera looks just like it's from the factory. The side cameras get installed under your side mirrors to give you a full view of your typical blind spots - automatically activated using your turn signals! The screen interface provides multi-cam support so you can add up to 4 total cameras to your factory 4.3", 5", or 8" display screen!
The integration module allows for integration into your factory screen without having to flash a program your radio. The rear camera will come on automatically when in reverse. Front camera can be manually activated using a toggle switch. Side cameras are activated with your blinkers.
This kit contains the following:
- CS-DTRF Front Camera Kit (with parking lines)
- CS-DTR This rear bezel with camera replace your existing bezel as a direct replacement kit
- (2) CS-USCK side camera kits
- UConnect interface module(radio screen not included)
- Multi cam switch
SKU | CS-DTR-FRS |
---|---|
Video System | NTSC |
Vehicle Interface | Includes Factory Integration Module |
Waterproof/Dustproof Level | IP 67 |
Night Vision | .1 Lux |
Power Supply | 12 Volts |
System Manufacturer | EVI Systems |
Camera Resolution | 600 TVL |
Parking Guidelines | Yes |
Connection | Plug and Play to Factory Dash Display |
Sensor Type | Super CMOS |
Viewing Angle | 170 Degrees |
Camera Input Ports | 4 |
Warranty | 3 Year |
Camera Type | Rear Camera, Front Camera, Side Camera, Multiple cameras (kit) |
Vehicle Category | Truck |
Number of Cameras | 4 |
Reason for Shopping | Adding the camera(s) |
Wiring Type | Factory Plug&Play |
Camera Mount Location | Factory Tailgate, Side Mirror, Front Grille |
For a monitor it uses | Your factory display |
Radio Screen Size | 4.3" Mopar, 5" Mopar, 8.4" Mopar |
Make | RAM |
Model | 1500,HD |
Year | 2013,2014,2015,2016,2017,2018 |
Make Filter | Ram |
Model Filter | 1500, HD |
Year Filter | 2013, 2014, 2015, 2016, 2017, 2018 |
Compatible with 2013-18 RAM® trucks with factory 4.3",5", or 8.4" radio system.
NOTE:
-Vehicles without audio SWC(steering wheel controls), located on the back of the steering wheel, will not support the Navigation Unlock or SWC Swap features.
-RAM® trucks equipped with a manual transmission will not support the forced Reverse Camera or Reverse Output Trigger features.
Front camera installation may not even require the removal of the front grille, drill hole for camera mount, and run harness to the cab through an existing grommet in the firewall. All the wiring is included.
The side cameras will mount under your side mirrors, which will require complete removal and disassembly of your mirrors. These mirrors can be challenging to disassemble so professional installation is recommended for this kit.
The MOPAR® tailgate handle replaces your existing handle as a direct replacement kit.
You will need to remove your factory screen to gain access to the back of the connections. The interface module connects to your factory radio and creates RCA connections to allow the cameras to connect directly to the screen. You will also install a video switch for adding more than one camera. Detailed instructions included.
Professional installation is recommended for this kit.
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount