Plug-Play Rear Surface Cam Kit, Fits 2021-2023 Ford® Ranger
Uses factory camera connector under tailgate!
Camera is FMVSS 111 compliant! This is a plug and play camera kit that will allow you to replace your factory tailgate camera with this rear facing surface mount camera!
This universal camera is surface mounted so it will require a flat section approximately 1" x 1" for mounting. Drill a small hole and run the cable through to your factory backup camera connection.
Kit includes the following:
- Chrome or black plated rear facing surface mount camera with our latest super CMOS camera - the latest camera technology!
- Mounting hardware
- OEM conversion harness
- 5', 10', 15', 25' cable lengths available. Select from drop down above.
- Zip ties
- Installation instructions
- 3 year limited camera warranty
Camera Specifications:
- Super CMOS chip - outstanding color, contrast, and clarity!
- Removable parking guidelines
- 170 degree view
- 600 TV lines of resolution
- .1 lux minimum illumination - Outstanding night vision!
**Not compatible with trucks that have the 360 surround view system**
SKU | CS-21FRGR8-RSM |
---|---|
Video System | NTSC |
Waterproof/Dustproof Level | IP 67 |
Night Vision | .1 Lux |
Power Supply | 12 Volts |
System Manufacturer | EVI Systems |
Camera Resolution | 600 TVL |
Parking Guidelines | Selectable on/off |
Camera Orientation | Rear Facing |
Fit Type | Universal fit |
Connection | Factory Connector |
Sensor Type | Super CMOS |
Viewing Angle | 170 Degrees |
Warranty | 3 Year |
Camera Type | Rear Camera, Utility Bed Camera Systems |
Vehicle Category | Truck, Camper/Trailer (if connecting to vehicle wiring) |
Number of Cameras | 1 |
Reason for Shopping | Relocating factory camera |
Wiring Type | Factory Plug&Play |
Camera Mount Location | Camper/Utility Bed, Universal Mount |
For a monitor it uses | Your factory display |
Radio Screen Size | Factory LCD |
Make | Ford |
Model | Ranger |
Year | 2021,2022,2023 |
Make Filter | Ford |
Model Filter | Ranger |
Year Filter | 2021, 2022, 2023 |
2021-2023 Ford® Ranger trucks with a factory installed backup camera. This kit relies on the factory camera chassis harness to operate. Not compatible if your truck has the 360 view system.
2021-2023 Ford® Ranger
FOR XLT AND LARIAT WITH THE 12 PIN CONNECTOR SEE SKU: CS-20FRGR-RSM
Note: The automatic lowering and power locking tailgate feature is disabled when using this kit as it is intended for applications where the tailgate is completely removed.
**EVI Systems has certified this camera system to comply with FMVSS 111 regulations as set forth by the National Highway Traffic Safety Administration (NHTSA). Testing has been performed jointly in-house and by a certified laboratory to meet or exceed the minimum requirements set forth by TP-111-V-01. FMVSS 111 field of view requirements and any other vehicle related certification is ultimately the responsibility of the vehicle up-fitter to ensure compliance.
Camera is drill-in style for surface mounting. It will require a flat section approximately 1" x 1" for mounting. Drill a small hole and connect the camera harness to the OEM conversion harness. Run the cable to your factory backup camera connection under the truck and plug it in.
Q: I have the factory 360 surround view camera system. Will this kit work?
A: This kit is not compatible if your truck has the factory 360 surround view system. We do have specific kits for trucks with the 360 surround view option. Please see our other kits for details.
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
![](/pub/media/contentmanager/content/military-discount_2_1.jpg)
![](/pub/media/wysiwyg/transparent.gif)
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount![](/pub/media/wysiwyg/transparent.gif)
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount![](/pub/media/contentmanager/content/comment-bubble_1.png)