2022 Super Duty OE Style Front Emblem Camera Kit and Side Cameras for 8" SYNC 4 -Multi-Cam Interface
OE Style Front and Side Camera Kits for 8" SYNC 4!
- Vehicles with OEM rear view camera: OEM rear camera will work as it did before
- Lane Watch Cameras (left and right): Automatically triggered with turn signals.
- Front Camera: Can be triggered at any time in any speed, by pressing and holding the radio volume button for 7 seconds.
- Rear Camera: Aftermarket rear view camera can be triggered at any time in any speed, by pressing and holding the radio volume button. Factory rear camera not available over 7 mph.
- Video in motion function: Allows passenger access to Navigation menu while vehicle is in motion.
- Video interface is 100% Plug & Play and requires no wire splicing.
- NO DEALER ACTIVATION REQUIRED!
- Composite Video Input: is controlled by the Volume button and is designed for***Sold separately***
- - 1. DVD
- - 2. Game Consoles
- - 3. PC’s
- - 4. Smartphones / Tablets (Depending on the type of smartphone / Tablet you intend to use a Smartphone Mirror Interface is required and sold separately)
Music or Video playback from Smartphones / Tablets can be achieved with a Smartphone Mirror Interface add-on.(sold separately) - NO DEALER ACTIVATION REQUIRED! This kit allows you to see what is directly in front of truck and will look like it came from the factory! The side cameras will complement this system perfectly!
This camera comes with a 3 year warranty and the interface module has a 1 year warranty. Professional installation is recommended. **Radio not included*
| SKU | 7CS-22FTRSDFOE-8S4FS |
|---|---|
| Video System | NTSC |
| Vehicle Interface | Includes Factory Integration Module |
| Waterproof/Dustproof Level | IP 67 |
| Night Vision | .1 Lux |
| Power Supply | 12 Volts |
| System Manufacturer | EVI Systems |
| Camera Resolution | 600 TVL |
| Parking Guidelines | Selectable on/off |
| Camera Orientation | Front Facing |
| Connection | Plug and Play to Factory Dash Display |
| Sensor Type | Super CMOS |
| Sensor Brand | EVI Systems |
| Viewing Angle | 170 Degrees |
| Camera Input Ports | 4 |
| Warranty | 3 Year |
| Grade Level | OE Grade |
| Camera Type | Front Camera, Side Camera, Multiple cameras (kit) |
| Vehicle Category | Truck |
| Number of Cameras | 3 |
| Reason for Shopping | Adding the camera(s) |
| Wiring Type | Hard Wired |
| Camera Mount Location | Side Mirror, Front Grille |
| For a monitor it uses | Your factory display |
| Radio Screen Size | 8" Ford Sync 4 |
| Make | Ford |
| Model | Super Duty |
| Year | 2022 |
| Make Filter | Ford |
| Model Filter | Super Duty |
| Year Filter | 2022 |
2022 F250,F350,F450 with camera cutout in the grille and 8" SYNC 4 factory radio display.
***Your factory grille must have the camera cutout for this kit to fit properly. If your grille does not have this cutout, your factory grille will have to be swapped with a different grille that is designed to mount the camera assembly and this grille is NOT included in the kit.
*** See images for an example of a grille with camera cutout. If needed, many times you can find a brand new grille with the required cutout on ebay or from a Ford dealership.
NOTE: This camera is pre-mounted into an OEM front Ford emblem. This kit uses an OEM bracket and cannot be retrofitted to any other application.
The front camera mounts into your factory grille by replacing your existing emblem assembly with this camera assembly. **Camera wash system not included. Cover for the opening of where the camera wash system installs is included.
The side cameras will mount under your side mirrors, which will require complete removal and disassembly of your mirrors. You will need to have a flat level surface to mount the side cameras. A downward taper in your mirror mount will cause the camera to have a downward view and in some cases it cannot be overcome with the amount of camera adjustment available. Installing a bracket will solve that problem.
These mirrors can be challenging to disassemble so professional installation is recommended for this kit.
Run the harnesses to the cab and connect to your factory 8" SYNC 4 radio using the included multi-cam interface. All plug and play - no cutting of factory wires! You must remove your factory radio in order to gain access to the wiring, professional installation is recommended.
Connect 12 volt power module directly to the battery. Connect all camera power wires directly to the power module.
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount 10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount