2020-2021 Super Duty OE Style Front Emblem Camera For 8" SYNC 3 display
View front camera anytime!
Add an OE style front emblem camera to your vehicle and unlock the factory NAV system to allow the passenger to enter addresses while the vehicle is in motion! The front camera in this kit comes pre-mounted in an OEM Ford bracket so it will look like the front camera that comes with the Ford 360 system. Swap out your existing factory emblem for this emblem and housing with a pre-mounted camera. ***Your factory grille must have the camera cutout for this kit to fit properly. If your grille does not have this cutout, your factory grille will have to be swapped with a different grille that is designed to mount the camera assembly and this grille is NOT included in the kit. *** See images for an example of a grille with camera cutout. If needed, many times you can find a brand new grille with the required cutout on ebay or from a Ford dealership View Front camera at any time: Perfect for parking! Manually activate the front camera by pressing and holding the radio volume/power button for 7 seconds. The unit will automatically turn on the front camera for 7 seconds after you switch out of reverse gear. Navigation unlock: This interface module allows passenger access to the Navigation menu while vehicle is in motion. Passenger can enter a destination address on the go! Camera specifications: No monitor is included with this kit as it is designed to work with your existing factory radio screen. This camera comes with a 3 year warranty. Professional installation is recommended.
SKU | CS-20FTRSDFOE-RU |
---|---|
Cam Only/Complete Kit | Complete Kit |
Video System | NTSC |
Vehicle Interface | Includes Factory Integration Module |
Waterproof/Dustproof Level | IP 67 |
Night Vision | < .2 Lux |
Power Supply | 12 Volts |
System Manufacturer | EVI Systems |
Camera Resolution | 600 TVL |
Parking Guidelines | Selectable on/off |
Camera Orientation | Front Facing |
Connection | Plug and Play to Factory Dash Display |
Sensor Type | Super CMOS |
Sensor Brand | EVI Systems |
Viewing Angle | 170 Degrees |
Camera Input Ports | 1 |
Warranty | 3 Year |
Grade Level | OE Grade |
Camera Type | Front Camera |
Vehicle Category | Truck |
Number of Cameras | 1 |
Reason for Shopping | Adding the camera(s) |
Wiring Type | Hard Wired |
Camera Mount Location | Front Grille |
For a monitor it uses | Your factory display |
Radio Screen Size | 8" Ford Sync 3 |
Make | Ford |
Model | Super Duty |
Year | 2020,2021 |
Make Filter | Ford |
Model Filter | Super Duty |
Year Filter | 2020, 2021 |
2020-2021 F250, F350, F450 with SYNC 3 radio and camera cutout in the grille.
***Your factory grille must have the camera cutout for this kit to fit properly. If your grille does not have this cutout, your factory grille will have to be swapped with a different grille that is designed to mount the camera assembly and this grille is NOT included in the kit.
*** See images for an example of a grille with camera cutout. If needed, many times you can find a brand new grille with the required cutout on ebay or from a Ford dealership.
NOTE: This camera is pre-mounted into an OEM front Ford emblem. This kit uses an OEM bracket and cannot be retrofitted to any other application.
The front camera mounts into your factory grille by replacing your existing emblem assembly with this camera assembly.
Run the harness to the cab and connect to your factory SYNC 3 radio using the included interface. You must remove your factory radio in order to gain access to the wiring, professional installation is recommended.
Connect the camera power wire to the 12 volt output wire on the interface module.
Plug the camera RCA into the RCA input on the interface module.
**Camera wash system not included. Cover for the opening of where the camera wash system installs is included.
Activation Information:
Nav in Motion: Press and hold the Mute button on the steering wheel for 7 seconds, the function is activated for 60 seconds. This allows you to enter an address while the vehicle is in motion.
Force Front Camera: Press and hold the radio power button for 7 seconds to turn on the front camera at any time.
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount