Plug & Play Rear Surface Cam Kit, Fits 2019+ RAM® 1500 Classic Body Style
Uses factory camera connector under tailgate!
FMVSS 111 compliant! This is a plug and play camera kit that will allow you to replace your factory tailgate camera with this rear facing surface mount camera!
Compatible with 2019+ RAM® 1500 Classic Body Style trucks that came from the factory with a tailgate camera. See our other options for other RAM® models.
This universal camera is surface mounted so it will require a flat section approximately 1" x 1" for mounting. Drill a small hole and run the cable through to your factory backup camera connection.
Kit includes the following:
- Chrome or Black plated rear facing surface mount camera with our latest super CMOS camera - the latest camera technology!
- Mounting hardware
- OEM conversion harness
- 5', 10',15' or 25' cable lengths available
- Zip ties
- Installation instructions
- 3 year limited camera warranty
Camera Specifications:
-
- Super CMOS chip - outstanding color, contrast, and clarity!
- Removable parking guidelines
- 170 degree view
- 600 TV lines of resolution
- .1 lux minimum illumination - Outstanding night vision!
SKU | CS-19DTRSK-RSM |
---|---|
Video System | NTSC |
Waterproof/Dustproof Level | IP 67 |
Night Vision | .1 Lux |
Power Supply | 12 Volts |
System Manufacturer | EVI Systems |
Camera Resolution | 600 TVL |
Parking Guidelines | Selectable on/off |
Camera Orientation | Rear Facing |
Fit Type | Universal fit |
Connection | Factory Connector |
Sensor Type | Super CMOS |
Viewing Angle | 170 Degrees |
Warranty | 3 Year |
Camera Type | Rear Camera, Utility Bed Camera Systems |
Vehicle Category | Truck, Camper/Trailer (if connecting to vehicle wiring) |
Number of Cameras | 1 |
Reason for Shopping | Relocating factory camera |
Wiring Type | Factory Plug&Play |
Camera Mount Location | Camper/Utility Bed, Universal Mount |
For a monitor it uses | Your factory display |
Radio Screen Size | 4.3" Mopar, 5" Mopar, 8.4" Mopar |
Make | RAM |
Model | 1500 |
Year | 2019,2020,2021,2022 |
Make Filter | Ram |
Model Filter | 1500 |
Year Filter | 2019, 2020, 2021, 2022 |
2019+ RAM® 1500 Classic Body Style truck with a factory installed backup camera. This kit relies on the factory camera chassis harness to operate.
**EVI Systems has certified this camera system to comply with FMVSS 111 regulations as set forth by the National Highway Traffic Safety Administration (NHTSA). Testing has been performed jointly in-house and by a certified laboratory to meet or exceed the minimum requirements set forth by TP-111-V-01. FMVSS 111 field of view requirements and any other vehicle related certification is ultimately the responsibility of the vehicle up-fitter to ensure compliance.
Camera is drill-in style for flat mounting. It will require a flat section approximately 1" x 1" for mounting. Drill a small hole and connect the camera harness to the OEM conversion harness. Run the cable to your factory backup camera connection under the truck and plug it in.
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount