Front and Side Camera Kit for 7" IOB Display, Fits 2016-2018 GM®
Front & Side cams for 7" IOB display
This is a complete kit that contains our universal front camera, two side cameras, and a multi-cam integration module for your 7" factory IOB screen.
Because of the complexity of the side mirror disassembly professional installation is recommended.
Kit includes:
- Multi-cam interface for your IOB 7" factory display (display not included)- plug and play and no dealer flashing required!
- Universal front camera with harness and dual mount brackets
- Two side cameras (mount under your side mirrors)
- Mounting hardware
- Camera wiring harnesses
- Zip ties
- Detailed installation instructions
- 3 year warranty on the cameras
Camera Specifications:
- CMOS forward looking camera - designed for front applications
- Side cameras are designed for rear-view applications and can be fully adjusted to meet your view needs
- 150 degree view
- 500 TV lines of resolution
- .2 lux minimum illumination - Outstanding night vision!
Multi Cam interface:
- Plug and play with your factory IOB display
- Programs the radio to allow cameras to be shown on the factory display
- Creates the RCA connection for a total of 4 cameras
*Additional cameras and display monitor are not included with this kit. This kit allows you to see what is directly in front of the truck as well as beside the truck! Cameras come with a 3 year warranty. Professional installation is recommended.
SKU | CS-16GMTR-7FS |
---|---|
Video System | NTSC |
Vehicle Interface | Includes Factory Integration Module |
Waterproof/Dustproof Level | IP 67 |
Night Vision | .2 Lux |
Power Supply | 12 Volts |
System Manufacturer | EVI Systems |
Camera Resolution | 500 TVL |
Parking Guidelines | Selectable on/off |
Camera Orientation | Front or Rear Facing |
Connection | Plug and Play to Factory Dash Display |
Sensor Type | CMOS III |
Viewing Angle | 150 Degrees |
Camera Input Ports | 4 |
Warranty | 3 Year |
Camera Type | Front Camera, Side Camera, Multiple cameras (kit) |
Vehicle Category | Truck |
Number of Cameras | 3 |
Reason for Shopping | Adding the camera(s) |
Wiring Type | Hard Wired |
Camera Mount Location | Side Mirror, Front Grille |
For a monitor it uses | Your factory display |
Radio Screen Size | 7" MyLInk/Intellilink |
Make | Chevrolet,GMC |
Model | Silverado,Silverado HD,Sierra,Sierra HD,Colorado,Canyon |
Year | 2016,2017,2018 |
Make Filter | Chevrolet, GMC |
Model Filter | Canyon, Colorado, Sierra, Sierra HD, Silverado, Silverado HD |
Year Filter | 2016, 2017, 2018 |
The side cameras will mount under your side mirrors, which will require complete removal and disassembly of your mirrors. These mirrors can be challenging to disassemble so professional installation is recommended for this kit.
Front camera mounts to any flat surface and has parking guidelines that can be turned off. You will need to switch it to the forward looking image on the harness during the installation.
The IOB multi-cam integration module is plug and play with your factory 7" IOB screen. You will need to remove your factory 7" screen to gain access to the back of the connections. The module will be plug and play and stubs out an RCA for the cameras to connect directly to the screen.
Q: What is the thumbdrive used for?
A: It is only used for future updates. It is currently empty.
Q: What is the HDMI port on the module used for?
A: This is used for connecting your phone or other device to the module to have the device mirrored on your vehicle display. You will need a separate HDMI cable that has the specific connector for your device on the other end.
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount