Front & Rear Camera Kit for Factory Display, Fits 2013-18 RAM®
Front & rear cams for factory Display!
This is a complete kit that contains our Mopar® tailgate handle rear camera, surface mount front camera, and multi-cam integration module. Compatible with 2013-18 RAM® trucks with factory 4.3",5", or 8.4" radio system.
Here's a complete solution for your RAM truck that will allow you to see clearly while backing AND allow you to see forward in tight spaces! This kit does not require any splicing into factory wiring and will work on any 2013-2018 RAM® 1500,2500,3500 series with factory display. The integration module allows for plug and play integration into your factory screen without having to flash program your radio. The rear camera will come on automatically when in reverse and front camera can be manually activated using the forward arrow on the steering wheel.
This kit contains the following:
- CS-DTR Rear Camera Kit (with parking lines)
- CS-DTRF Front Camera Kit (with parking lines)
- Multi-cam interface module
- Multi cam switch
**Display not included as this kit uses your existing factory display.
SKU | CS-DTR-FR |
---|---|
Video System | NTSC |
Vehicle Interface | Includes Factory Integration Module |
Waterproof/Dustproof Level | IP 67 |
Night Vision | .1 Lux |
Power Supply | 12 Volts |
System Manufacturer | EVI Systems |
Camera Resolution | 600 TVL |
Parking Guidelines | Yes |
Connection | Plug and Play to Factory Dash Display |
Sensor Type | Super CMOS |
Viewing Angle | 170 Degrees |
Camera Input Ports | 4 |
Warranty | 3 Year |
Camera Type | Rear Camera, Front Camera, Multiple cameras (kit) |
Vehicle Category | Truck |
Number of Cameras | 2 |
Reason for Shopping | Adding the camera(s) |
Wiring Type | Factory Plug&Play |
Camera Mount Location | Factory Tailgate, Front Grille |
For a monitor it uses | Your factory display |
Radio Screen Size | 4.3" Mopar, 5" Mopar, 8.4" Mopar |
Make | RAM |
Model | 1500,HD |
Year | 2013,2014,2015,2016,2017,2018 |
Make Filter | Ram |
Model Filter | 1500, HD |
Year Filter | 2013, 2014, 2015, 2016, 2017, 2018 |
Compatible with 2013-18 RAM® trucks with factory 4.3",5", or 8.4" radio system.
The Multi-cam integration module is plug and play with your factory RAM® screen. The rear camera kit will replace your factory tailgate handle.
Front camera-Simple installation may not even require the removal of the front grille, drill hole for camera mount, and run harness to the cab through an existing grommet in the firewall. All the wiring is included and installation can be accomplished in 2-3 hours (times vary with experience).
You will need to remove your factory screen to gain access to the back of the connections. The module will be plug and play and stubs out to an RCA for the camera to connect directly to the screen. You will also install a video switch for adding more than one camera. Detailed instructions included.
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount