2010-2022 4Runner Mini Universal Camera Kit - Plug and Play
Uses your factory camera connector!
Camera is FMVSS 111 compliant! This is a plug and play camera kit that will allow you to relocate your factory rear camera to a different location when adding a bike rack or spare tire swing mount to your 4Runner. This kit is plug and play into the existing camera connector located in your hatch.
Simply mount the camera on any surface and run the included cable to your factory backup camera connection in the hatch for a seamless installation.
Kit includes the following:
- Super CMOS camera with night vision and optional parking lines
- Factory integration cable (plugs in under the box just in front of the rear bumper, uses the same connector as your factory camera). Cable is 14' long to easily route through the tailgate and allow you to mount the camera in a preferred location.
- 3 year warranty!
Camera Specifications:
- Super CMOS 600 TV lines of resolution
- Optional parking lines - cut a wire on the harness to turn them off
- Mirror/Non-Mirror function - cut a wire on the harness to turn the camera into a non-mirror front facing camera
- IR sensor for night vision
- 170 degree view
- 6 volt input designed specifically for Toyota® applications
- <.2 lux (very little light required to operate)
- Small design for versatility in mounting
- Dual mounting system, choose either the license plate mount or the universal mini-mount for alternate locations. Both are included!
SKU | CS-4RUN-LP |
---|---|
Video System | NTSC |
Waterproof/Dustproof Level | IP 68 Camera |
Night Vision | < .2 Lux |
Power Supply | 6 Volts |
System Manufacturer | EVI Systems |
Camera Resolution | 600 TVL |
Parking Guidelines | Selectable on/off |
Camera Orientation | Front or Rear Facing |
Fit Type | Universal fit |
Connection | Factory Connector |
Sensor Type | Super CMOS |
Viewing Angle | 170 Degrees |
Warranty | 3 Year |
Camera Type | Rear Camera |
Vehicle Category | Truck |
Number of Cameras | 1 |
Reason for Shopping | Relocating factory camera |
Wiring Type | Factory Plug&Play |
Camera Mount Location | Universal Mount |
For a monitor it uses | Your factory display |
Radio Screen Size | Factory LCD |
Make | Toyota |
Model | 4Runner |
Year | 2010,2011,2012,2013,2014,2015,2016,2017,2018,2019,2020,2021,2022 |
Make Filter | Toyota |
Model Filter | 4Runner |
Year Filter | 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 |
2010-2022 4Runner with factory installed backup camera.
NOTE: vehicle must have come from the factory with a rear camera in order for this kit to function.
Install camera on either your license plate mount or on any flat surface - comes with two brackets.
Universal mount will require a flat section approximately 1" x 1" for mounting.
Run the cable to your factory backup camera connection in the tailgate and plug it in. Secure all wires away from any pinch points.
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount