This is an adjustable mounting bracket with OEM camera that will allow you to relocate your factory installed tailgate camera on your 2019-2024 RAM® 2500,3500 truck.
Aftermarket truck equipment manufacturers and upfitters often lose the rearview camera system altogether when removing a RAM® Truck’s tailgate with built-in camera.
Simply unplug your factory tailgate camera behind the rear bumper and remove your tailgate. Install the relocation bracket and housing with OEM camera and mount on any flat surface. Run the camera coaxial harness to the factory camera plug and reconnect. Bracket tilt is adjustable to obtain the perfect view! The camera will function the same on your factory display. This kit is only compatible with 2019-2024 RAM® 2500,3500 trucks that came from the factory with the tailgate camera system.
For trucks with the 360 surround view system see SKU: CS-DTR-19RSCU-HD
Display not included as this kit uses your existing factory display.
Kit includes the following:
Adjustable mounting bracket with housing-MADE IN THE USA!
OEM camera
14 foot extension harness
Bracket hardware
Mounting hardware
Adhesive tape
One year warranty!
More Information
SKU
CS-DTR-19RNCU-HD
System Manufacturer
Camera Source
Camera Orientation
Rear Facing
Connection
Factory Connector
Warranty
1 Year
Camera Type
Rear Camera, Utility Bed Camera Systems, Trailer/Camper/5th Wheel camera
Vehicle Category
Truck, Camper/Trailer (if connecting to vehicle wiring)
Number of Cameras
1
Reason for Shopping
Relocating factory camera
Wiring Type
Factory Plug&Play
Camera Mount Location
Camper/Utility Bed, Universal Mount
For a monitor it uses
Your factory display
Radio Screen Size
8.4" Mopar
Make
Ram
Model
HD
Year
2019,2020,2021,2022,2023,2024
Make Filter
Ram
Model Filter
HD
Year Filter
2019, 2020, 2021, 2022, 2023, 2024
2019-2024 RAM® 2500,3500 trucks that came from the factory with a tailgate camera.
Not compatible if your truck has the 360 surround view system. For trucks with the 360 surround view system see SKU: CS-DTR-19RSCU-HD
This kit provides a way of maintaining the camera system after the vehicle’s tailgate has been removed.
Unplug your existing factory tailgate camera under the truck.
Mount the adjustable bracket to any flat surface and connect the camera housing assembly to the bracket.
Run the camera extension harness to the factory plug under the truck and connect.
Q: Can I get just the bracket and extension harness without the camera?
A: Yes! See SKU: CS-DTR-19RNA. This is for the relocation bracket and 14 foot extension harness only. You will need to remove your factory camera from the tailgate handle and install it into the relocation bracket. Then plug the extension harness into the factory connector.