Tailgate Handle Cam for Intellilink/Mylink systems-Programmer included, Fits 2014-2018 Sierra,Silverado
Includes OBD programmer!
Now you can integrate a backup camera directly into your new GMC® Sierra or Chevy® Silverado Mylink/Intellilink screen. (See compatibility section for specific fit)
Vehicle must have option code IO4, IO5, or IO6 on the glovebox sticker to be compatible.
This camera kit is the perfect solution for those who own a 2014+ GM® truck with MyLink or Intellilink screen and are in need of a rear view camera. The kit comes complete with rear camera system, which is a high resolution camera mounted in an OEM tailgate handle assembly. Comes with all the wiring and OEM screen integration harness needed to interface directly with your MyLink or Intellilnk system with no dealer flashing required. This system will also enable the steerable parking guidelines directly into your screen!
The kit comes with the following:
- Night vision, high resolution camera - 600 lines of resolution mounted in an OEM tailgate handle
- Full chassis harness
- MyLink/Intellilink integration harness
- OBD programming module
- Required mounting hardware/connectors
Camera has a 3 year warranty and will look like it was installed at the factory!
SKU | CS-14GMTR-G2TG |
---|---|
Video System | NTSC |
Vehicle Interface | Includes Factory Integration Module |
Waterproof/Dustproof Level | IP 67 |
Night Vision | < .2 Lux |
Power Supply | 12 Volts |
System Manufacturer | EVI Systems |
Camera Resolution | 600 TVL |
Parking Guidelines | Selectable on/off |
Camera Orientation | Rear Facing |
Connection | Plug and Play to Factory Dash Display |
Sensor Type | Super CMOS |
Viewing Angle | 170 Degrees |
Warranty | 3 Year |
Camera Type | Rear Camera |
Vehicle Category | Truck |
Reason for Shopping | Adding the camera(s) |
Wiring Type | Hard Wired |
Camera Mount Location | Factory Tailgate |
For a monitor it uses | Your factory display |
Radio Screen Size | 4.2" MyLink, 8" MyLInk/Intellilink |
Make | Chevrolet,GMC |
Model | Silverado,Silverado HD,Sierra,Sierra HD,Colorado,Canyon |
Year | 2014, 2015, 2016,2017,2018 |
Make Filter | Chevrolet, GMC |
Model Filter | Canyon, Colorado, Sierra, Sierra HD, Silverado, Silverado HD |
Year Filter | 2014, 2015, 2016, 2017, 2018 |
2014-2018 Sierra/Silverado with the IO4, IO5, or IO6 option code listed on the glove box sticker.
2015-2018 Sierra/Silverado 2500 & 3500 with the IO4, IO5, or IO6 option code listed on the glove box sticker.
**NOT COMPATIBLE WITH IO3 or IOB DISPLAY**
Replace your existing tailgate handle assembly with this assembly, which is preloaded with the rear camera. Route the harness to the cab and install the RCA T-Harness to the back of your factory MyLink/Intellilink display. Locate a 12 volt power source and ground to the chassis.
Make installation even easier with an add on 12 Volt power source to eliminate the need to locate a power source on the vehicle and avoid cutting or splicing into factory wiring! See related item SKU: CS-RPW-P
Plug the OBD programmer into the OBD port and programming is completed in less than a minute!
NO DEALER ACTIVATION REQUIRED
Q: Can the OBD programmer be used on more than one vehicle?
A: No, the programmer is VIN locked to your vehicle after one use. After you've programmed your factory radio it is recommended that you store the programmer in the glovebox just in case programming is ever lost due to vehicle servicing, etc.
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount